A new design of UHF tag antenna for clothing identification using SRR

Badr Nasiri, Ahmed Kh. Errkik, Jamal Zbitou

Abstract


In this paper, we present a new antenna for Radio Frequency Identification (RFID) tag operating in the Moroccan Ultra High Frequency (UHF) band around 868 MHz, this antenna is designed on a flexible plastic substrate of relativepermittivity 3 and low tangential losses which is 0.002. The proposed tag is designed to identify clothing in supermarkets. The tag antenna has a miniature size of 38mm in length and 26mm in width. This miniature size was obtained by using two Rectangular Split Ring Resonator (RSRR). The impedance matching of the RFID chip with the antenna was carried out by a double T-matching structure. The antenna is designed, simulated and optimized using Computer Simulation Technology (CST) Microwave Studio software and good results have been obtained in terms of impedance matching, gain and read range

Keywords


antenna; clothing; identification; metamaterial; RFID; tag antenna;



DOI: http://dx.doi.org/10.12928/telkomnika.v19i6.16964

Article Metrics

Abstract view : 0 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120
Fax: +62 274 564604

View TELKOMNIKA Stats