Editorial Policies

Focus and Scope

TELKOMNIKA (Telecommunication Computing Electronics and Control) is a peer reviewed International Journal in English published four issues per year (March, June, September and December). The aim of TELKOMNIKA is to publish high-quality articles dedicated to all aspects of the latest outstanding developments in the field of electrical engineering.
Its scope encompasses the engineering of signal processing, electrical (power), electronics, instrumentation & control, telecommunication, computing and informatics which covers, but not limited to, the following scope:

Signal Processing: Signal Theory, Digital Signal & Data Processing, Stochastic Processes, Detection and Estimation, Spectral Analysis, Filtering, Signal Processing Systems, Environmental Signal Processing, Software Developments, Image Processing, Pattern Recognition, Optical Signal Processing, Digital Signal Processing, Multi-dimensional Signal Processing, Communication Signal Processing, Biomedical Signal Processing, Geophysical and Astrophysical Signal Processing, Earth Resources Signal Processing, Acoustic and Vibration Signal Processing, Data Processing, Remote Sensing, Signal Processing Technology, Speech Processing, Signal Processing for Audio, Visual and Performance Arts, Radar Signal Processing, Sonar Signal Processing, Seismic Signal Processing, Medical Imaging Equipment and Techniques, Biomedical Imaging and Image Processing, Video Processing, Industrial Applications, New Applications, etc

Electronics: Electronic Materials, Microelectronic System, Design and Implementation of Application Specific Integrated Circuits (ASIC), VLSI Design, System-on-a-Chip (SoC) and Electronic Instrumentation Using CAD Tools, Biomedical Transducers and instrumentation, Biomechanics and Rehabilitation Engineering, Transistor, MOSFET, CMOS, etc

Electrical: Electrical Engineering Materials, Electric Power Generation, Transmission and Distribution, Power Electronics, Power Quality, Power Economic, FACTS, Renewable Energy, Electric Traction, Electromagnetic Compatibility, High Voltage Insulation Technologies, High Voltage Apparatuses, Lightning Detection and Protection, Power System Analysis, SCADA, Electrical Measurements, etc

Telecommunication: Modulation and Signal Processing for Telecommunication, Information Theory and Coding, Antenna and Wave Propagation, Wireless and Mobile Communications, Radio Communication, Communication Electronics and Microwave, Radar Imaging, Distributed Platform, Communication Network and Systems, Telematics Services and Security Network, etc

Instrumentation & Control: Optimal, Robust and Adaptive Controls, Non Linear and Stochastic Controls, Modeling and Identification, Robotics, Image Based Control, Hybrid and Switching Control, Process Optimization and Scheduling, Control and Intelligent Systems, Artificial Intelligent and Expert System, Fuzzy Logic and Neural Network, Complex Adaptive Systems, etc

Computing and Informatics: Computer Architecture, Parallel and Distributed Computer, Pervasive Computing, Computer Network, Embedded System, Human—Computer Interaction, Virtual/Augmented Reality, Computer Security, Software Engineering (Software: Lifecycle, Management, Engineering Process, Engineering Tools and Methods), Programming (Programming Methodology and Paradigm), Data Engineering (Data and Knowledge level Modeling, Information Management (DB) practices, Knowledge Based Management System, Knowledge Discovery in Data), Network Traffic Modeling, Performance Modeling, Dependable Computing, High Performance Computing, Computer Security, Human-Machine Interface, Stochastic Systems, Information Theory, Intelligent Systems, IT Governance, Networking Technology, Optical Communication Technology, Next Generation Media, Robotic Instrumentation, Information Search Engine, Multimedia Security, Computer Vision, Information Retrieval, Intelligent System, Distributed Computing System, Mobile Processing, Next Network Generation, Computer Network Security, Natural Language Processing, Business Process, Cognitive Systems, etc

 

Section Policies

Power Engineering

This Section covers all topics in power engineering with specific emphasis on Power System, Protection systems, Electrical Engineering Materials, Electric Power Generation, Transmission and Distribution, Power Quality, Power Economic, FACTS, Renewable Energy, Electric Traction, Electromagnetic Compatibility, High Voltage Insulation Technologies, High Voltage Apparatuses, Lightning Detection and Protection, Power System Analysis, SCADA, Electrical Measurements.

Editors
  • Tarek Bouktir
  • Mochammad Facta
  • Ahmad Samosir
  • Ahmet Teke
Checked Open Submissions Checked Indexed Checked Peer Reviewed

Power Electronics and Drives

This Section covers all topics in Power Electronics and Drives with specific emphasis on power Electronic designs, inverter, converter, machine drives, etc.

Editors
  • Pekik Argo Dahono
  • Yang Han
  • Shahrin Md Ayob
  • Nik Rumzi Nik Idris
Checked Open Submissions Checked Indexed Checked Peer Reviewed

Electronics

This Section covers all topics in electronics engineering with specific emphasis on Electronic Materials, Microelectronic System, semiconductor devices, analogue circuits, digital electronics, embedded systems, Design and Implementation of Application Specific Integrated Circuits (ASIC), VLSI Design, System-on-a-Chip (SoC) and Electronic Instrumentation Using CAD Tools, medical electronics, biomedical transducers and instrumentation, etc.

Editors
  • Faycal Djeffal
  • Mark Hooper
  • Munawar Riyadi
  • Jumril Yunas
Checked Open Submissions Checked Indexed Checked Peer Reviewed

Telecommunication

This Section covers all topics in telecommunication engineering with specific emphasis on information theory, communication theory and techniques, modulation, source and channel coding, switching theory and techniques, communication protocols, optical communications, microwave theory and techniques, radar, sonar, antennas, wave propagation, etc.

Editors
  • Andrea Morabito
  • Leo P. Ligthart
  • Youssef Said
  • Surinder Singh
  • Lunchakorn Wuttisittikulkij
  • Zahriladha Zakaria
Checked Open Submissions Checked Indexed Checked Peer Reviewed

Control Engineering

This Section covers all topics in control & automation theory and its applications with specific emphasis on Control Theory; Control Applications; Robotics and Automation; Intelligent and Information Systems for control system; Optimal, Robust and Adaptive Controls; Non Linear and Stochastic Controls; Modeling and Identification; Robotics; Image Based Control; Hybrid and Switching Control; Process Optimization and Scheduling; Control and Intelligent Systems; Artificial Intelligent and Expert System, Fuzzy Logic and Neural Network for for Control systems; Complex Adaptive Control Systems; etc

Editors
  • Balza Achmad
  • Srinivasan Alavandar
  • Auzani Jidin
  • Omar Lengerke
  • Zhixiong Li
Checked Open Submissions Checked Indexed Checked Peer Reviewed

Signal Processing

This Section covers all topics in digital signal processing with specific emphasis on signal processing, image processing, video processing, pattern recognition, medical Imaging Equipment and techniques, biomedical Imaging and Image processing, signal and system, neural-network for signal processing, fuzzy logic for signal processing, etc.

Editors
  • Hussain Al-Ahmad
  • Supavadee Aramvith
  • Nidhal Bouaynaya
  • D. Jude Hemanth
  • Arianna Mencattini
Checked Open Submissions Checked Indexed Checked Peer Reviewed

Machine Learning, AI and Soft Computing

This section covers machine learning, machine intelligence and machine translation, evolutionary computing, evolutionary algorithms and genetic programming, computational models for machine intelligence, bee colony algorithm, harmony search algorithm, evolutionary and swarm algorithms, artificial intelligence (AI), intelligent search, reactive distributed AI, neural science and neural net systems, expert systems, fuzzy set theory and fuzzy systems, probabilistic reasoning, chaos theory and chaotic systems, hybrid intelligent systems, morphic Computing, rough sets, multi-agent systems, emotional intelligence, etc.

Editors
  • Luis Paulo Reis
  • Mirosław Swiercz
  • Achmad Widodo
  • Longquan Yong
Checked Open Submissions Checked Indexed Checked Peer Reviewed

Computer Science/Informatics and Information System

Computing and Informatics: Computer Architecture, Parallel and Distributed Computer, Pervasive Computing, Computer Network, Embedded System, Human—Computer Interaction, Virtual/Augmented Reality, Computer Security, Software Engineering (Software: Lifecycle, Management, Engineering Process, Engineering Tools and Methods), Programming (Programming Methodology and Paradigm), Data Engineering (Data and Knowledge level Modeling, Information Management (DB) practices, Knowledge Based Management System, Knowledge Discovery in Data), Network Traffic Modeling, Performance Modeling, Dependable Computing, High Performance Computing, Computer Security, Human-Machine Interface, Stochastic Systems, Information Theory, Intelligent Systems, IT Governance, Networking Technology, Optical Communication Technology, Next Generation Media, Robotic Instrumentation, Information Search Engine, Multimedia Security, Computer Vision, Information Retrieval, Intelligent System, Distributed Computing System, Mobile Processing, Next Network Generation, Computer Network Security, Natural Language Processing, Business Process, Cognitive Systems, etc

Editors
  • Franco Frattolillo, Ph.D.
  • Tutut Herawan
  • Wanquan Liu
  • Yin Liu
  • Dr. Deris Stiawan
Checked Open Submissions Checked Indexed Checked Peer Reviewed
 

Peer Review Process

Submitted papers are evaluated by anonymous referees by double blind peer review for contribution, originality, relevance, and presentation. The Editor shall inform you of the results of the review as soon as possible, hopefully in 3 months. Please notice that because of the great number of submissions that TELKOMNIKA TCEC has received during the last few months the duration of the review process can be up to 5 months.

 

Open Access Policy

This journal provides immediate open access to its content on the principle that making research freely available to the public supports a greater global exchange of knowledge.

 

Publication Ethics and Publication Malpractice Statement

This statement clarifies ethical behaviour of all parties involved in the act of publishing an article in our journals, including the authors, the editors, the peer-reviewers and the publisher (Universitas Ahmad Dahlan and Institute of Advanced Engineering and Science). This statement is based on COPE’s Best Practice Guidelines for Journal Editors.


Ethical Guideline for Journal Publication


The publication of an article in a peer-reviewed IAES Journals is an essential building block in the development of a coherent and respected network of knowledge. It is a direct reflection of the quality of the work of the authors and the institutions that support them. Peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behavior for all parties involved in the act of publishing: the authors, the journal editors, the peer reviewers, the publisher and the society. 

Universitas Ahmad Dahlan (UAD) and Institute of Advanced Engineering and Science (IAES) as publisher of this Journal takes its duties of guardianship over all stages of publishing extremely seriously and we recognize our ethical and other responsibilities. We are committed to ensuring that advertising, reprint or other commercial revenue has no impact or influence on editorial decisions. In addition, the UAD, IAES and Editorial Board will assist in communications with other journals and/or publishers where this is useful and necessary.


Publication decisions


The editors of the IAES journals are responsible for deciding which of the articles submitted to the journal should be published. The validation of the work in question and its importance to researchers and readers must always drive such decisions. The editors may be guided by the policies of the journal's editorial board and constrained by such legal requirements as shall then be in force regarding libel, copyright infringement and plagiarism. The editors may confer with other editors or reviewers in making this decision.


Fair play


An editor at any time evaluate manuscripts for their intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the authors.


Confidentiality


The editor and any editorial staff must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate.


Disclosure and conflicts of interest


Unpublished materials disclosed in a submitted manuscript must not be used in an editor's own research without the express written consent of the author.



Duties of Reviewers


Contribution to Editorial Decisions


Peer review assists the editor in making editorial decisions and through the editorial communications with the author may also assist the author in improving the paper.


Promptness


Any selected referee who feels unqualified to review the research reported in a manuscript or knows that its prompt review will be impossible should notify the editor and excuse himself from the review process.


Confidentiality


Any manuscripts received for review must be treated as confidential documents. They must not be shown to or discussed with others except as authorized by the editor.


Standards of Objectivity


Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Referees should express their views clearly with supporting arguments.


Acknowledgement of Sources


Reviewers should identify relevant published work that has not been cited by the authors. Any statement that an observation, derivation, or argument had been previously reported should be accompanied by the relevant citation. A reviewer should also call to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published paper of which they have personal knowledge.


Disclosure and Conflict of Interest

Privileged information or ideas obtained through peer review must be kept confidential and not used for personal advantage. Reviewers should not consider manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the papers.




Duties of Authors


Reporting standards


Authors of reports of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the paper. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable.


Data Access and Retention


Authors are asked to provide the raw data in connection with a paper for editorial review, and should be prepared to provide public access to such data (consistent with the ALPSP-STM Statement on Data and Databases), if practicable, and should in any event be prepared to retain such data for a reasonable time after publication.


Originality and Plagiarism


The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted.


Multiple, Redundant or Concurrent Publication


An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Submitting the same manuscript to more than one journal concurrently constitutes unethical publishing behaviour and is unacceptable.


Acknowledgement of Sources

Proper acknowledgment of the work of others must always be given. Authors should cite publications that have been influential in determining the nature of the reported work.


Authorship of the Paper


Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study. All those who have made significant contributions should be listed as co-authors. Where there are others who have participated in certain substantive aspects of the research project, they should be acknowledged or listed as contributors. The corresponding author should ensure that all appropriate co-authors and no inappropriate co-authors are included on the paper, and that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication.


Hazards and Human or Animal Subjects

If the work involves chemicals, procedures or equipment that have any unusual hazards inherent in their use, the author must clearly identify these in the manuscript.


Disclosure and Conflicts of Interest


All authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed to influence the results or interpretation of their manuscript. All sources of financial support for the project should be disclosed.


Fundamental errors in published works

When an author discovers a significant error or inaccuracy in his/her own published work, it is the author’s obligation to promptly notify the journal editor or publisher and cooperate with the editor to retract or correct the paper.

 

Withdrawal of Manuscripts

Author is not allowed to withdraw submitted manuscripts, because the withdrawal is waste of valuable resources that editors and referees spent a great deal of time processing submitted manuscript, money and works invested by the publisher.
If author still requests withdrawal of his/her manuscript when the manuscript is still in the peer-reviewing process, author will be punished with paying $200 per manuscript, as withdrawal penalty to the publisher. However, it is unethical to withdraw a submitted manuscript from one journal if accepted by another journal. The withdrawal of manuscript after the manuscript is accepted for publication, author will be punished by paying US$500 per manuscript. Withdrawal of manuscript is only allowed after withdrawal penalty has been fully paid to the Publisher.

If author don't agree to pay the penalty, the author and his/her affiliation will be blacklisted for publication in this journal. Even, his/her previously published articles will be removed from our online system.

 

TELKOMNIKA Profile in Scimago and Google Scholar

SCImago Journal & Country Rank

SCImago Journal & Country Rank


TELKOMNIKA Telecommunication, Computing, Electronics and Control - Google Scholar Citations

 

Retraction and Correction policies

Universitas Ahmad Dahlan (UAD) takes its responsibility to maintain the integrity and completeness of the scholarly record of our content for all end users very seriously. Changes to articles after they have been published online may only be made under the circumstances outlined below. UAD places great importance on the authority of articles after they have been published and our policy is based on best practice in the academic publishing community. An Erratum is a statement by the authors of the original paper that briefly describes any correction(s) resulting from errors or omissions. Any effects on the conclusions of the paper should be noted. The corrected article is not removed from the online journal, but notice of erratum is given. The Erratum is made freely available to all readers and is linked to the corrected article. A Retraction is a notice that the paper should not be regarded as part of the scientific literature. Retractions are issued if there is clear evidence that the findings are unreliable, this can be as a result of misconduct or honest error; if the findings have previously been published elsewhere without proper referencing, permission or justification; if the work is plagiarized; or if the work reports unethical research. To protect the integrity of the record, the retracted article is not removed from the online journal, but notice of retraction is given, is made freely available to all readers, and is linked to the retracted article. Retractions can be published by the authors when they have discovered substantial scientific errors; in other cases, the Editors or Publisher may conclude that retraction is appropriate. In all cases, the retraction indicates the reason for the action and who is responsible for the decision. If a retraction is made without the unanimous agreement of the authors, that is also noted. In rare and extreme cases involving legal infringement, the Publisher may redact or remove an article. Bibliographic information about the article will be retained to ensure the integrity of the scientific record. A Publisher’s Note notifies readers that an article has been corrected subsequent to publication. It is issued by the Publisher and is used in cases where typographical or production errors (which are the fault of the Publisher) affect the integrity of the article metadata (such as title, author list or byline) or will significantly impact the readers' ability to comprehend the article. The original article is removed and replaced with a corrected version. Publisher’s Notes are freely available to all readers. Minor errors that do not affect the integrity of the metadata or a reader's ability to understand an article and that do not involve a scientific error or omission will be corrected at the discretion of the Publisher. In such a case, the original article is removed and replaced with a corrected version. The date the correction is made is noted on the corrected article. Authors should also be aware that an original article can only be removed and replaced with a corrected version less than one year after the original publication date. Corrections to an article which has a publication date that is older than one year will only be documented by a Publisher’s Note. The following guideline may also be helpful: COPE Guidelines for Retracting Articles