Submissions

Online Submissions

Already have a Username/Password for TELKOMNIKA (Telecommunication Computing Electronics and Control)?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

 

Author Guidelines

Authors should submit only manuscripts that have been carefully proofread and polished. Manuscripts are accepted with the understanding that they are original or extended version of previously published papers in conferences and/or journals and that, if the work received an official sponsorship, it has been duly released for open publication. Before submission please make sure that your manuscript is prepared using the journal paper template. The authors must refer to TELKOMNIKA Journal for writing format and style (Please download and use as a template for initial manuscript submission in .DOCX or LATEX). Use of a tool such as EndNote, Mendeley, or Zotero for reference management and formatting, and choose IEEE style. This will ensure fast processing and publication. Any papers not fulfilling the requirements based on the guideline to authors will not be processed.

 

Manuscript types acceptable for peer review

  1. Regular – This is a classic research article that has a hypothesis, investigation, solution, model, physical experiment and/or simulation and a result that is of value to the community within that area of expertise
  2. Topical review – This is a review of an emerging area within the journal’s scope that performs a technical and critical review of other articles. Calculations are performed and conclusions are drawn on the strengths and weaknesses. The conclusion can also discuss future challenges.
  3. Theory – This is a scholarly article that uses mathematical methods to develop new theoretical results of importance to the field.
  4. Survey – A survey article analyzes, summarizes, systemizes, and presents fresh conclusions from a large number of recently published scholarly articles.
  5. Perspective – This category of article is an in-depth viewpoint article intended to bring together a big picture in a fast-evolving landscape of technological development. It will typically be a topic where there is community uncertainty and/or disagreement. This category of article will typically be written by a leading authority in an area.
  6. Applied research – This article describes challenges and practical solutions for topics within the journal’s scope. Quantitative results for validation of the approach are expected.
  7. Negative result – This is a non-trivial theoretical or experimental negative or null result that does not support a hypothesis. Provided that the research question posed is meaningful and the study is rigorously conducted, this type of article has value to the engineering community.
  8. Methods – This article will report the development of new or improved fabrication or manufacturing technique, or a new experimental, measurement or mathematical technique. Applied research articles focus on practical systems, while here the focus is on methods.
  9. Comment – This is an article that comments on another published article. A comment points out a technical error, oversight, or presents an opposing position. It is a critique, providing corrections, and performs analyses.
  10. Reply – A reply article is submitted by the authors of a published paper in response to a Comment article.

You can use this list to carry out a final check of your submission before you send it to the journal for review. Please check the relevant section in this Guide for Authors for more details.

  1. Is your manuscript written in TELKOMNIKA format?  At this stage, it is not that essential that you  follow every detail of TELKOMNIKA format. Please try to follow the format as closely as possible.
  2. is your title adequate and is your abstract correctly written? The title of paper is max 12 words, without Acronym or abbreviation. The Abstract (MAX 200 WORDS) should be informative and completely self-explanatory (no citation in abstract), provide a clear statement of the problem, the proposed approach or solution, and point out major findings and conclusions.
  3. Authors are suggested to present their articles in the sections structure: Introduction - The Proposed Method/Algorithm/Framework/Procedure specifically designed (optional) - Research Method - Results and Discussion – Conclusion. Authors may present complex proofs of theorems or non-obvious proofs of correctness of algorithms after introduction section (obvious theorems & straightforward proofs of existing theorems are NOT needed).
  4. Introduction section: explain the context of the study and state the precise objective. An Introduction should contain the following three parts:
    - Background: Authors have to make clear what the context is. Ideally, authors should give an idea of the state-of-the art of the field the report is about.
    - The Problem: If there was no problem, there would be no reason for writing a manuscript, and definitely no reason for reading it. So, please tell readers why they should proceed reading. Experience shows that for this part a few lines are often sufficient.
    - The Proposed Solution: Now and only now! - authors may outline the contribution of the manuscript. Here authors have to make sure readers point out what are the novel aspects of authors work.
    Authors should place the paper in proper context by citing relevant papers. At least, 10 references (recently journal articles) are referred in this section to show lack of previous research studies, and the uniqueness or novelty of the research on the topic.
  5. Method section: the presentation of the experimental methods should be clear and complete in every detail facilitating reproducibility by other scientists.
  6. Results and discussion section: The presentation of results should be simple and straightforward in style. This section report the most important findings, including results of statistical analyses as apropriate and comparisons to other research results. Results given in figures should not be repeated in tables. This is where the author(s) should explain in words what he/she/they discovered in the research. It should be clearly laid out and in a logical sequence. This section should be supported suitable references.
  7. Conclusion section: Summarize sentences the primary outcomes of the study in a paragraph. Are the claims in this section supported by the results, do they seem reasonable? Have the authors indicated how the results relate to expectations and to earlier research? Does the article support or contradict previous theories? Does the conclusion explain how the research has moved the body of scientific knowledge forward?
  8. Language. If an article is poorly written due to grammatical errors, while it may make it more difficult to understand the science.
  9. Please be sure that the manuscript is up to date. It is expected that 20 to 30%  of references are to recent papers.
  10. Is the manuscript clearly written?  Is the article exciting? Does the content flow well from one section to another? Please try to keep your manuscript on the proper level.  It should be easy to understand by well qualified professionals, but at the same time please avoid describing well known facts (use proper references instead). Often manuscripts receive negative reviews because reviewers are not able to understand the manuscript and this is authors' (not reviewers') fault.  Notice, that if reviewers have difficulties, then other readers will face the same problem and there is no reason to publish the manuscript.
  11. Do you have enough references?  We will usually expect a minimum of 25 to 30 references primarily to journal papers, depending on the length of the paper. Citations of textbooks should be used very rarely and citations to web pages should be avoided. All cited papers should be referenced within the text of the manuscript.
  12. Figures and Tables. Relation of Tables or Figures and Text: Because tables and figures supplement the text, all tables and figures should be referenced in the text. Authors also must explain what the reader should look for when using the table or figure. Focus only on the important point the reader should draw from them, and leave the details for the reader to examine on her own.
    Figures:
    a.    All figures appearing in article must be numbered in the order that they appear in the text.
    b.    Each figure must have a caption fully explaining the content
    c.    Figure captions are presented as a paragraph starting with the figure number i.e. Figure 1, Figure 2, etc.
    d.    Figure captions appear below the figure
    e.    Each figure must be fully cited if taken from another article
    f.    all figures must be referred to in the body of the article
    Tables:
    a.    Material that is tabular in nature must appear in a numbered captioned table.
    b.    All tables appearing in article must be numbered in the order that they appear in the text.
    c.    Each table must have a caption fully explaining the content with the table number  i.e. Table 1, Table 2, etc.
    d.    Each column must have a clear and concise heading
    e.    Tables are to be presented with single horizontal line under: the table caption, the column headings and at the end of the table.
    f.    All tables must be referred to in the body of the article
    g.    Each table must be fully cited if taken from another article
  13. Each citation should be written in the order of appearance in the text in square brackets. For example, the first citation [1], the second citation [2], and the third and fourth citations [3], [4]. When citing multiple sources at once, the preferred method is to list each number separately, in its own brackets, using a comma or dash between numbers, as such: [1], [3], [5] or [4]-[8]. It is not necessary to mention an author's name, pages used, or date of publication in the in-text citation. Instead, refer to the source with a number in a square bracket, e.g. [9], that will then correspond to the full citation in your reference list. Examples of in-text citations:
    • This theory was first put forward in 1970 [9]."
    • Sutikno [10] has argued that...
    • Several recent studies [7], [9], [11]-[15] have suggested that....
    • ...end of the line for my research [16].
  14. Self-citations: to control for citation manipulation (COPE, 2019), this journal asks that authors keep self-citation to a minimum. We would strongly recommend no more than 5 (including jointly authored publications), or 20% self-citations, whichever number is lower.
  15. Please be aware that for the final submission of regular paper you will be asked to tailor your paper so the last page is not half empty.

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration/not be submitted elsewhere (or an explanation has been provided in Comments to the Editor).
  2. The submission file is in Microsoft Word (DOC or DOCX) file format. If you would like your paper in LATEX format, please submit your paper in PDF file format and submit your paper in LATEX format to telkomnika [at] uad.ac.id cc: telkomnika [at] ee.uad.ac.id
  3. Author lists should be carefully considered before submission. All authors should be listed on both the manuscript MS Word (or PDF if you use LaTeX in preparing your paper) as well as on the author list within OJS manuscript. Changes to author list post acceptance are not allowed.

  4. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
  5. The article should be thoroughly reviewed for proper grammar before being submitted.
  6. All research works should be carefully referenced.
 

Copyright Notice

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

 

Author Fees

This journal charges the following author fees.

Article Submission: 0.00 (USD)
Authors are not required to pay an Article Submission Fee as part of the submission process to contribute to review costs.

Article Publication Fee (APF): 265.00 (USD)

To support the cost of wide open access dissemination of research results, to manage the various costs associated with handling and editing of the submitted manuscripts, and the Journal management and publication in general, the authors or the author's institution is requested to pay a publication fee for each article accepted. The USD 265 fee covers the standard eight (8) pages manuscript (included bibliography page). For every additional page an extra fee of 50 USD per page will be charged. Instructions for money transfer via bank transfer will be provided by the editor with the notification of acceptance for the accepted paper.

This fee includes:

  • DOI registration for each paper
  • Checking the article similarity by iThenticate
  • Layout and Formatting Finalization

Manuscripts submitted by high impact authors (first and corresponding author with minimum Scopus/WoS h-index: 12; all authors have min h-index: 8, and at least two authors from different countries) are eligible for the 50% discount on the APF. If first and corresponding author has minimum h-index: 17, all authors have min h-index: 10, and at least two authors from different countries, APF is free of charge.

An author or group of authors who cannot afford the publication fee may be eligible for a partial waiver of publication fees. We do not want fees to prevent the publication of worthy work. The partial waiver is intended primarily for authors from low-income countries who are without funding. It is unlikely that a partial waiver will be granted to authors from established academic or research centres in the developed world. If you would like to apply for a fee partial waiver, you will need to email Editor-in-Chief (EiC) before submission with details about your research paper, such as author names and positions, institutions, funding and type of research. Please contact the EiC for more information at telkomnika [at] uad.ac.id.