Low-cost and open-source anthropomorphic prosthetics hand using linear actuators

Triwiyanto Triwiyanto, I Putu Alit Pawana, Torib Hamzah, Sari Luthfiyah

Abstract


A robust, low cost, open-source, and low power consumption in the research of prosthetics hand is essential. The purpose of this study is to develop a low-cost, open-source anthropomorphic prosthetics hand using linear actuator based on electromyography (EMG) signal control. The main advantages of this proposed method are the low-cost, lightweight and simplicity of controlling the prosthetic hand using only single channel. This is achieved by evaluating the DC motor and exploring number of locations of the EMG signal. The development of prosthetics hand consists of 3D anthropomorphic hand design, active electrodes, microcontroller, and linear actuator. The active electrodes recorded the EMG signal from extensor carpi radialis longus. The built-in EMG amplifier on the electrode amplified the EMG signal. Further, the A/D converter in the Arduino microcontroller converted the analog signal into digital. A filtering process consisted of bandpass and notch filter was performed before it used as a control signal. The linear actuator controlled each finger for flexion and extension motion. In the assessment of the design, the prosthetic hand capable of grasping ten objects. In this study, the cost and weight of the prosthetics hand are 471.99 US$ and 0.531 kg, respectively. This study has demonstrated the design of low cost and open-source of prosthetics hand with reasonable cost and lightweight. Furthermore, this development could be applied to amputee subjects.


Keywords


3D printing; anthropomorphic; EMG signal; linear actuator; prosthetics hand;

Full Text:

PDF


DOI: http://dx.doi.org/10.12928/telkomnika.v18i2.14799

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus, 9th Floor, LPPI Room
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120 ext. 4902, Fax: +62 274 564604

View TELKOMNIKA Stats