Prediction of PID control model on PLC

Erwani Merry Sartika, T. Rudi Sarjono, Diki Dwi Saputra

Abstract


PID (Proportional Integral Derivative) is a control algorithm that mostly used in industry. However, users have never known what the PID model that used inside the PLC. By knowing the PID model that used in PLC, users will have more choice in determining the more appropriate tuning algorithm. Also, users can use MATLAB to perform analysis and can implement it to PLC. Through OPC Server (Object Linking and Embedding for Process Control Server) as a software interface, programs on a windows operating system can communicate with industry devices universally. PID model prediction method is done by comparing the output of the plant controlled by PID model in PLC and PID model in SIMULINK MATLAB using OPC Server intermediaries. Based on comparison result in graph and analysis using integral error method, PLC M221 using Parallel PID model and PLC S7-1200 using Ideal PID model.

Keywords


MATLAB; PID control; PLC; prediction;

Full Text:

PDF


DOI: http://dx.doi.org/10.12928/telkomnika.v17i1.11589

Article Metrics

Abstract view : 146 times
PDF - 145 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Universitas Ahmad Dahlan

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus, 9th Floor, LPPI Room
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120 ext. 4902, Fax: +62 274 564604

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

View TELKOMNIKA Stats