Strain Transfer and Test Research of Stick-up Fiber Bragg Grating Sensors

Wang Bing, Wang Xiaoli

Abstract


Because of the flaws of fiber Bragg grating, needs to set up protective layer between the structure and fiber layer to protect the fiber grating. Firstly the strain transferring rules of the FBG sensors is analyzed, carefully analyze the main factors influencing the fiber Bragg grating strain sensor transfer, and analyze concretely effect of each factor, the fiber Bragg grating sensors embedded angle deviation is analyzed and influence on the measured results. Finally, by a series of repeated, coherent, dynamic and fatigue characteristic test, it is proved that the FBG sensor has applied value


Keywords


fiber Bragg grating sensors;strain transfer;angle deviation

Full Text:

PDF


DOI: http://dx.doi.org/10.12928/telkomnika.v12i3.107

Article Metrics

Abstract view : 199 times
PDF - 142 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2014 Universitas Ahmad Dahlan

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus, 9th Floor, LPPI Room
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120 ext. 4902, Fax: +62 274 564604

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

View TELKOMNIKA Stats