A Small RLSA Antenna Utilizing the Specification of Back Fires 17 dBi LAN Antennas
This research developed a small RLSA antenna that mimics the specification of a Wi-Fi antenna that is available in markets, which is a Back Fires 17 dBi LAN antenna. This research used the size of the back fires antenna as the size for the RLSA antenna. Base on this size, we designed and simulated 71 RLSA antenna models. Among them, we chose a best model and fabricated its prototype. We measured the prototype and found that the measurement result fits the simulation result, thus verifying the correctness of the antenna model. Furthermore, we analysed that with the same size, our RLSA antenna has better performance compared to the back fires antenna, in term of gain (0,53 dB higher), and in term of bandwidth (1075 MHz wider). We also found that our RLSA antenna is lighter and thinner compared to the back fires antenna. We also test the RLSA antenna in real condition for indoor and outdoor communication link. The test showed that the RLSA antenna can performs properly.
Article MetricsAbstract view : 13 times
PDF - 25 times
- There are currently no refbacks.
Copyright (c) 2018 Universitas Ahmad Dahlan
TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus, 9th Floor, LPPI Room
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120 ext. 4902, Fax: +62 274 564604
View TELKOMNIKA Stats
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.