Solution Stirring Design Using Magnetic Stirrer on DC Motor with PLC-Based PID Method
DOI:
https://doi.org/10.26555/jiteki.v11i1.26534Keywords:
PLC, PID, Motor DC, Magnetic StirrerAbstract
Along with the development of the times, the industrial and manufacturing world also develops. One of the activities that is widely carried out in the industrial and manufacturing world is stirring production raw materials, either in the form of solutions or liquids. The purpose of the stirring process is to get a perfectly mixed (homogeneous) stirring. For this reason, a device is needed that can stir the solution as desired. One type of tool that can be used is a magnetic stirrer placed on a DC motor. However, when the DC motor is given a load, the DC motor tends to become unstable so a controller is needed. To solve this problem used PID controller. PID controllers use control constants in the form of PB, Tick, and Tdk. To obtain the controlling constant, a process of trial and error is carried out. The most stable results obtained from the testing process were PB = 600%, Tik = 1.2 s, and Tdk = 0.2 s. With system response in the form of rise time 0.7778 s, peak time = 5s. settling time 5.4286 s, overshoot = 2.8571 RPM and steady state error = 0%. The setpoint used is 700 RPM with a sampling time of 60 ms. The developed system successfully achieves stable and well-controlled stirring. The results of this research contribute to the improvement of solution stirring processes in the industrial and manufacturing domains. The developed system can be effectively utilized for stirring solutions, enhancing the efficiency and quality of production processes.
References
[1] A. Dehghan, A. Gholizadeh, M. Navidbakhsh, H. Sadeghi, and E. Pishbin, “Integrated microfluidic system for efficient DNA extraction using on-disk magnetic stirrer micromixer,” Sens Actuators B Chem, vol. 351, p. 130919, Jan. 2022, https://doi.org/10.1016/j.snb.2021.130919.
[2] Y. Wang et al., “Unexpected exfoliation and activity of nano poly(tetrafluoroethylene) particles from magnetic stir bars: Discovery and implication,” Chemosphere, vol. 291, p. 132797, Mar. 2022, https://doi.org/10.1016/j.chemosphere.2021.132797.
[3] E. O. Pentsak, D. B. Eremin, E. G. Gordeev, and V. P. Ananikov, “Phantom Reactivity in Organic and Catalytic Reactions as a Consequence of Microscale Destruction and Contamination-Trapping Effects of Magnetic Stir Bars,” ACS Catal, vol. 9, no. 4, pp. 3070–3081, Apr. 2019, https://doi.org/10.1021/acscatal.9b00294.
[4] M. R. Golpayegani, R. Akramipour, and N. Fattahi, “Sensitive determination of deferasirox in blood of patients with thalassemia using dispersive liquid-liquid microextraction based on solidification of floating organic drop followed by HPLC–UV,” J Pharm Biomed Anal, vol. 193, p. 113735, Jan. 2021, https://doi.org/10.1016/j.jpba.2020.113735.
[5] Q. Wu et al., “Metal-Free Catalyst with Large Carbon Defects for Efficient Direct Overall Water Splitting in Air at Room Pressure,” ACS Appl Mater Interfaces, vol. 12, no. 27, pp. 30280–30288, Jul. 2020, https://doi.org/10.1021/acsami.0c02544.
[6] S. Muromachi, “Phase equilibrium data for semiclathrate hydrates formed with tetra-n-butylammonium (bromide or chloride) and tetra-n-butylphosphonium (bromide or chloride) under hydrogen + carbon dioxide pressure,” Fluid Phase Equilib, vol. 506, p. 112389, Feb. 2020, https://doi.org/10.1016/j.fluid.2019.112389.
[7] H. Wibawa, O. Wahyunggoro, and A. I. Cahyadi, “DC Motor Speed Control Using Hybrid PID-Fuzzy with ITAE Polynomial Initiation,” IJITEE (International Journal of Information Technology and Electrical Engineering), vol. 3, no. 1, p. 7, 2019, https://doi.org/10.22146/ijitee.46590.
[8] Sunardi, A. Yudhana, and Furizal, “Tsukamoto Fuzzy Inference System on Internet of Things-Based for Room Temperature and Humidity Control,” IEEE Access, vol. 11, pp. 6209–6227, 2023, https://doi.org/10.1109/ACCESS.2023.3236183.
[9] Furizal, Sunardi, and A. Yudhana, “Temperature and Humidity Control System with Air Conditioner Based on Fuzzy Logic and Internet of Things,” Journal of Robotics and Control (JRC), vol. 4, no. 3, pp. 308–322, 2023, https://doi.org/10.18196/jrc.v4i3.18327.
[10] S. Bicakci, M. Coramik, H. Gunes, H. Citak, and Y. Ege, “Increasing Energy Efficiency With Fuzzy Logic Control in FPGA-Based Electromagnetic Stirrer,” IEEE Transactions on Plasma Science, vol. 49, no. 7, pp. 2195–2209, Jul. 2021, https://doi.org/10.1109/TPS.2021.3090326.
[11] M. G. Kumar, R. V. Maheswari, M. Bakrutheen, and B. Vigneshwaran, “Fuzzy Logic Based Efficient Blending of Mineral and Vegetable Oil as Alternate Liquid Insulation,” in 2022 6th International Conference on Electronics, Communication and Aerospace Technology, pp. 326–329, Dec. 2022, ] https://doi.org/10.1109/ICECA55336.2022.10009050.
[12] A. Maarif and N. R. Setiawan, “Control of dc motor using integral state feedback and comparison with pid: Simulation and arduino implementation,” Journal of Robotics and Control (JRC), vol. 2, no. 5, pp. 456–461, 2021, https://doi.org/10.18196/jrc.25122.
[13] X. Sun, C. Hu, G. Lei, Y. Guo, and J. Zhu, “State Feedback Control for a PM Hub Motor Based on Gray Wolf Optimization Algorithm,” IEEE Trans Power Electron, vol. 35, no. 1, pp. 1136–1146, Jan. 2020, https://doi.org/10.1109/TPEL.2019.2923726.
[14] A. Apte, V. A. Joshi, H. Mehta, and R. Walambe, “Disturbance-Observer-Based Sensorless Control of PMSM Using Integral State Feedback Controller,” IEEE Trans Power Electron, vol. 35, no. 6, pp. 6082–6090, Jun. 2020, https://doi.org/10.1109/TPEL.2019.2949921.
[15] X. Sun, Z. Jin, Y. Cai, Z. Yang, and L. Chen, “Grey Wolf Optimization Algorithm Based State Feedback Control for a Bearingless Permanent Magnet Synchronous Machine,” IEEE Trans Power Electron, vol. 35, no. 12, pp. 13631–13640, Dec. 2020, https://doi.org/10.1109/TPEL.2020.2994254.
[16] Y. Wang, Y. Feng, X. Zhang, and J. Liang, “A New Reaching Law for Antidisturbance Sliding-Mode Control of PMSM Speed Regulation System,” IEEE Trans Power Electron, vol. 35, no. 4, pp. 4117–4126, Apr. 2020, https://doi.org/10.1109/TPEL.2019.2933613.
[17] X. Yu, Y. Feng, and Z. Man, “Terminal Sliding Mode Control – An Overview,” IEEE Open Journal of the Industrial Electronics Society, vol. 2, pp. 36–52, 2021, https://doi.org/10.1109/OJIES.2020.3040412.
[18] F. Mohd Zaihidee, S. Mekhilef, and M. Mubin, “Robust Speed Control of PMSM Using Sliding Mode Control (SMC)—A Review,” Energies (Basel), vol. 12, no. 9, p. 1669, May 2019, https://doi.org/10.3390/en12091669.
[19] J. Hu, H. Zhang, H. Liu, and X. Yu, “A survey on sliding mode control for networked control systems,” Int J Syst Sci, vol. 52, no. 6, pp. 1129–1147, Apr. 2021, https://doi.org/10.1080/00207721.2021.1885082.
[20] R. P. Borase, D. K. Maghade, S. Y. Sondkar, and S. N. Pawar, “A review of PID control, tuning methods and applications,” Int J Dyn Control, vol. 9, no. 2, pp. 818–827, Jun. 2021, https://doi.org/10.1007/s40435-020-00665-4.
[21] S. B. Joseph, E. G. Dada, A. Abidemi, D. O. Oyewola, and B. M. Khammas, “Metaheuristic algorithms for PID controller parameters tuning: review, approaches and open problems,” Heliyon, vol. 8, no. 5, p. e09399, May 2022, https://doi.org/10.1016/j.heliyon.2022.e09399.
[22] B. Guo, Z. Zhuang, J.-S. Pan, and S.-C. Chu, “Optimal Design and Simulation for PID Controller Using Fractional-Order Fish Migration Optimization Algorithm,” IEEE Access, vol. 9, pp. 8808–8819, 2021, https://doi.org/10.1109/ACCESS.2021.3049421.
[23] J. Zhang and L. Guo, “Theory and Design of PID Controller for Nonlinear Uncertain Systems,” IEEE Control Syst Lett, vol. 3, no. 3, pp. 643–648, Jul. 2019, https://doi.org/10.1109/LCSYS.2019.2915306.
[24] S. Ekinci and B. Hekimoglu, “Improved Kidney-Inspired Algorithm Approach for Tuning of PID Controller in AVR System,” IEEE Access, vol. 7, pp. 39935–39947, 2019, https://doi.org/10.1109/ACCESS.2019.2906980.
[25] J. Bhookya and R. K. Jatoth, “Optimal FOPID/PID controller parameters tuning for the AVR system based on sine–cosine-algorithm,” Evol Intell, vol. 12, no. 4, pp. 725–733, Dec. 2019, https://doi.org/10.1007/s12065-019-00290-x.
[26] C. Gong, “Jaya Algorithm-Optimized PID Controller for AVR System,” in IISA 2018. Advances in Intelligent Systems and Computing, pp. 382–393, 2019, https://doi.org/10.1007/978-3-030-02804-6_52.
[27] J. B. Odili, A. Noraziah, and A. E. Babalola, “A new fitness function for tuning parameters of Peripheral Integral Derivative Controllers,” ICT Express, vol. 8, no. 3, pp. 463–467, Sep. 2022, https://doi.org/10.1016/j.icte.2021.10.006.
[28] E. Widya Suseno and A. Ma’arif, “Tuning of PID Controller Parameters with Genetic Algorithm Method on DC Motor,” International Journal of Robotics and Control Systems, vol. 1, no. 1, pp. 41–53, Feb. 2021, https://doi.org/10.31763/ijrcs.v1i1.249.
[29] I. Tejado, B. Vinagre, J. Traver, J. Prieto-Arranz, and C. Nuevo-Gallardo, “Back to Basics: Meaning of the Parameters of Fractional Order PID Controllers,” Mathematics, vol. 7, no. 6, p. 530, Jun. 2019, https://doi.org/10.3390/math7060530.
[30] I. Anshory, I. Robandi, W. Wirawan, and J. Jamaaluddin, “Identification and implementation hybrid fuzzy logic and PID controller for speed control of BLDC motor,” J Phys Conf Ser, vol. 1402, no. 3, p. 033080, Dec. 2019, https://doi.org/10.1088/1742-6596/1402/3/033080.
[31] M. M. Bachtiar, F. Ardilla, M. F. Hasbi, and I. K. Wibowo, “PID Control System on Brushless DC Motor for Quadcopter Balance,” Inform : Jurnal Ilmiah Bidang Teknologi Informasi dan Komunikasi, vol. 6, no. 2, pp. 110–114, Jul. 2021, https://doi.org/10.25139/inform.v6i2.3999.
[32] S. Yahya, S. W. Jadmiko, K. Wijayanto, and A. R. A. Tahtawi, “Design and implementation of training module for control liquid level on tank using PID method based PLC,” IOP Conf Ser Mater Sci Eng, vol. 830, no. 3, p. 032065, Apr. 2020, https://doi.org/10.1088/1757-899X/830/3/032065.
[33] G. R. Wicaksono and R. D. Puriyanto, “Programmable Logic Controller (PLC) Based Paint Viscosity Control System,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 3, no. 1, p. 1, Jan. 2021, https://doi.org/10.12928/biste.v3i1.1109.
[34] D. Prastiyo and W. S. Aji, “Irrigation Sluice Control System Using Algorithm Based DC Motor PID And Omron PLC,” Control Systems and Optimization Letters, vol. 1, no. 1, pp. 19–26, Mar. 2023, https://doi.org/10.59247/csol.v1i1.5.
[35] Z. Wang, Y. Zhang, Y. Chen, H. Liu, B. Wang, and C. Wang, “A Survey on Programmable Logic Controller Vulnerabilities, Attacks, Detections, and Forensics,” Processes, vol. 11, no. 3, p. 918, Mar. 2023, https://doi.org/10.3390/pr11030918.
[36] J. Mellado and F. Núñez, “Design of an IoT-PLC: A containerized programmable logical controller for the industry 4.0,” J Ind Inf Integr, vol. 25, p. 100250, Jan. 2022, https://doi.org/10.1016/j.jii.2021.100250.
[37] D. Saputra, A. Ma’arif, H. Maghfiroh, P. Chotikunnan, and S. N. Rahmadhia, “Design and Application of PLC-based Speed Control for DC Motor Using PID with Identification System and MATLAB Tuner,” International Journal of Robotics and Control Systems, vol. 3, no. 2, pp. 233–244, Apr. 2023, https://doi.org/10.31763/ijrcs.v3i2.775.
[38] A. Setiawan and A. Ma’arif, “Stirring System Design for Automatic Coffee Maker Using OMRON PLC and PID Control,” International Journal of Robotics and Control Systems, vol. 1, no. 3, pp. 390–401, Oct. 2021, https://doi.org/10.31763/ijrcs.v1i3.457.
[39] R. Rikwan and A. Ma’arif, “DC Motor Rotary Speed Control with Arduino UNO Based PID Control,” Control Systems and Optimization Letters, vol. 1, no. 1, pp. 17–31, Mar. 2023, https://doi.org/10.59247/csol.v1i1.6.
[40] Z. B. Abdullah, S. W. Shneen, and H. S. Dakheel, “Simulation Model of PID Controller for DC Servo Motor at Variable and Constant Speed by Using MATLAB,” Journal of Robotics and Control (JRC), vol. 4, no. 1, pp. 54–59, Feb. 2023, https://doi.org/10.18196/jrc.v4i1.15866.
[41] A. Latif, A. Z. Arfianto, H. A. Widodo, R. Rahim, and E. T.Helmy, “Motor DC PID System Regulator for Mini Conveyor Drive Based-on Matlab,” Journal of Robotics and Control (JRC), vol. 1, no. 6, 2020, https://doi.org/10.18196/jrc.1636.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Hari Natawangsa, Furizal Furizal, Alfian Ma'arif, Wael A. Salah

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with JITEKI agree to the following terms:
- Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
This work is licensed under a Creative Commons Attribution 4.0 International License