Reliability Assessment of some Selected 11 kV Feeders within Ibadan Distribution Network

Authors

  • Abraham Olaide Amole Bells University of Technology
  • Muniru Olaide Olaide Okelola Ladoke Akintola University of Technology
  • Gabriel Olaide Amole University of Lagos

DOI:

https://doi.org/10.26555/jiteki.v6i2.18970

Keywords:

11kV feeders Distribution Network, Faults, Interruption Reliability

Abstract

The energy satisfaction that consumers can obtain from the central grid solely depends on how reliable the feeder to which such customers are connected, simply because the reliability of both generation and transmission is not enough to guarantee adequate and secure energy delivery. It is on this premise that this paper employed load point reliability indices to assess selected feeders within the Ibadan electricity distribution network. The required data for this analysis was collected from the Ibadan Electricity Distribution Company, at Ring Road, Ibadan, the collected data captured the total number of faults, total fault duration, and total operating time from 2016 to 2019. The load point reliability indices used as performance metrics include Failure Rate (FR), Mean Time Between Failures (MTBF), Mean Time to Repair (MTTR), Availability Factor (AVF), and Maintainability (M). An adequate comparison of each of these indices on each feeder was made for the period of investigation. It was discovered that many of these feeders were not reliable. Therefore, the need to carry out extensive maintenance on these feeders is non-negotiable. Also, the result of this analysis will help the Distribution Company (DisCo) to make informed decisions that will accelerate the reliability of these 11kV feeders across the investigated region.

Author Biography

Abraham Olaide Amole, Bells University of Technology

A lecturer in the Department of Electrical, Electronic and Computer Engineering, Bells University of Technology, P.M.B. 1015, Ota, Ogun State, Nigeria with specialization in power and control.

References

D. Deif, “A comprehensive wireless sensor network reliability metric for critical Internet of Things applications,†2017, doi: 10.1186/s13638-017-0930-3. DOI: https://doi.org/10.1186/s13638-017-0930-3

A. Aglargoz, H. Spangenberg, I. Flugsystemtechnik, and D. Z. Luft-, “SAFETY AND RELIABILITY ANALYSIS OF WIRELESS DATA COMMUNICATION CONCEPTS FOR FLIGHT CONTROL SYSTEMS Wireless Concept Flight Control System,†2014. DOI: https://doi.org/10.1109/DASC.2014.6979579

S. Sector and O. F. Itu, “K.139 (11/2018),†vol. 139, 2018.

S. Woo and D. L. O. Neal, “Improving the Reliability of Mechanical Components That Have Failed in the Field Due to Repetitive Stress,†pp. 1–14, 2019, DOI: https://doi.org/10.3390/met9010038

M. P. Anand, B. Bagen, and A. Rajapakse, “Electrical Power and Energy Systems Probabilistic reliability evaluation of distribution systems considering the spatial and temporal distribution of electric vehicles,†Electr. Power Energy Syst., vol. 117, no. July 2019, p. 105609, 2020, DOI: https://doi.org/10.1016/j.ijepes.2019.105609

A. A. Olatide and O. K. Idowu, “DISTRIBUTION TRANSFORMER SITUATED AT BELLS UNIVERSITY OF TECHNOLOGY , OTA , OGUN STATE USING FLUKE 435 SERIES II,†vol. 26, no. 2, pp. 20–27, 2020.

J. T. Putra and M. A. Sidiq, “Load Balancing on TJSB Transformer Distribution Using Two-Points Time Method,†vol. 4, no. 2, pp. 76–85, 2018. DOI: https://doi.org/10.26555/jiteki.v4i2.11809

E. Engineering, “Reliability Assessment of Ageing Distribution Cable for Replacement in Smart Distribution Systems,†2016.

M. S Okundamiya., J. O. Emagbetere, and E. A. Ogujor, "Modeling and optimum capacity allocation of micro-grids considering economy and reliability", J. Telecomm. Electron. Comp. Eng. 9(4), 55-61, 2017.

O. Franklin and A. G. A, “Reliability Analysis of Power Distribution System in Nigeria : A Case Study of Ekpoma Network , Edo State,†vol. 2, no. 3, pp. 175–182, 2014, DOI: https://doi.org/10.12720/ijeee.2.3.175-182

A. E. Airoboman and E. A. Ogujor, “Reliability optimization on power systems network using genetic algorithm,†vol. 2, pp. 18–29, 2020. DOI: https://doi.org/10.37121/jectr.vol2.119

J. J. Popoola, A. A. Ponnle, and T. O. Ale, “Reliability Worth Assessment of Electric Power Utility in Nigeria : Residential Customer Survey Results,†vol. 14, no. 3, pp. 217–224, 2011.

T. M. Abdul-wahhab, “Reliability Evaluation of Al _ Mansour 11kV Distribution Network in Baghdad City,†vol. 36, no. 3, 2018. DOI: https://doi.org/10.30684/etj.36.3A.9

U. A. Ali, “Reliability Analysis of Distribution Transformer A Case Study of Gwiwa Business Unit , Sokoto,†vol. 2012, 2012.

S. J. F. Production and B. Email, “The Relationship between Quality, Benchmarking, Reliability and Globalization in Industrial Engineering Activity,†vol. 30, no. 17, pp. 3065–3081, 2012.

R. A. Abttan, “Al - Kalij Sub-Station: Feeder Reconfiguration by Particle Swarm Optimization,†vol. 29, no. 12, 2011.

I. A. Samuel, A. A. Awelewa, J. Katende, and I. A. Odigwe, “Fault Tree-Based Reliability Assessment of a 132-kV Transmission Line Protection Scheme,†no. 10, 2013.

Y. Jibril and K. R. Ekundayo, “Reliability Assessment of 33kV Kaduna Electricity Distribution Feeders , Northern Region , Nigeria,†vol. I, no. 2009, pp. 23–25, 2013.

F. I. Izuegbunam, I. S. Uba, I. O. Akwukwaegbu, and D. O. Dike, “Reliability Evaluation of Onitsha Power Distribution Network via Analytical Technique and the Impact of PV System,†vol. 9, no. 3, pp. 15–22, 2014. DOI: https://doi.org/10.9790/1676-09321522

L. Wang, “The Fault Causes of Overhead Lines in Distribution Network,†vol. 02017, no. 2016, 2017. DOI: https://doi.org/10.1051/matecconf/20166102017

N. Nezamoddin and S. S. Lam, “Expert Systems with Applications Reliability and topology based network design using pattern mining guided genetic algorithm,†vol. 42, pp. 7483–7485, 2015. DOI: https://doi.org/10.1016/j.eswa.2015.05.019

J. Von Euler-chelpin and J. Von Euler-chelpin, “Distribution Grid Fault Location An Analysis of Methods for Fault Location in LV and MV Power Distribution Grids,†no. April, 2018.

O. S. Ololade, P. Tang, and S. Sinneh, “Reliability and Fault Analysis of Electrical Distribution System : A Case Study of Kafanchan Distribution Substation in Kaduna,†no. 1, pp. 180–188, 2020.

A. Airoboman, N. D. Academy, and E. A. Ogujor, “Reliability analysis of power system network : A case study of transmission company of Nigeria , Benin City,†no. September 2019, 2017, DOI: https://doi.org/10.1109/PowerAfrica.2017.7991206

M. O. Balogun, M. O. Ahmed, A. A. Ajani, and H. Olaoye, “Reliability Assessment of 33KV Feeder , ( A Case Study of Transmission Company of Nigeria , Ganmo Work Centre .),†no. 1, pp. 77–83, 2019.

P. U. Okorie and A. A. Ibrahim, “Reliability Evaluation of Power Distribution Network System in Kano Reliability Evaluation of Power Distribution Network System in Kano Metropolis of Nigeria,†no. January, 2015.

D. Panth, “REASONS FOR FAILURE OF TRANSMISSION LINES AND THEIR PREVENTION STRATEGIES,†no. 1, pp. 1–4, 2014.

O. Austin, O. A. E, A. Ariyo, and F. Ebenezer, “No Title,†vol. 3, no. 4, pp. 20–33, 2018.

D. Ogheneovo, “Assessment of Electric Power Distribution Feeders Reliability : A Case Study of Feeders that Supply Ede Town,†no. March, 2016.

U. Screen and E. Current, “Detection and Location of Earth Fault in MV Feeders Using Screen Earthing Current Measurements,†2020.

I. K. Okakwu and O. E. Seun, “The Reliability Study of 11-Kv Distribution Feeders : A Case Study of Idi-Araba Phcn Injection Substation,†vol. 10, no. 1, pp. 58–65, 2015.

S. Ghasemi, “Balanced and unbalanced distribution networks reconfiguration considering reliability indices,†Ain Shams Eng. J., 2016.

M. Bornapour, R. Hooshmand, A. Khodabakhshian, and M. Parastegari, “Optimal stochastic scheduling of CHP-PEMFC , WT , PV units and hydrogen storage in recon fi gurable micro grids considering reliability enhancement,†Energy Convers. Manag., vol. 150, no. April, pp. 725–741, 2017, doi: 10.1016/j.enconman.2017.08.041. DOI: https://doi.org/10.1016/j.asej.2016.11.010

M. Nayeripour, S. Hasanvand, E. Waffenschmidt, and H. Fallahzadeh-abarghouei, “A New Approach to Transform an Existing Distribution Network into a set of Micro-Grids for Enhancing Reliability and Sustainability,†Appl. Soft Comput. J., 2016, DOI: https://doi.org/10.1016/j.asoc.2016.12.013

Downloads

Published

2021-01-03

How to Cite

[1]
A. O. Amole, M. O. Olaide Okelola, and G. O. Amole, “Reliability Assessment of some Selected 11 kV Feeders within Ibadan Distribution Network”, J. Ilm. Tek. Elektro Komput. Dan Inform, vol. 6, no. 2, pp. 39–46, Jan. 2021.

Issue

Vol. 6 No. 2 (2020): December

Section

Articles

License

Authors who publish with JITEKI agree to the following terms:

  1. Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

Lisensi Creative Commons

This work is licensed under a Creative Commons Attribution 4.0 International License

Similar Articles

<< < 1 2 

You may also start an advanced similarity search for this article.