Ointment formulation of snakehead fish (Channa striata) Extract with variations of CMC-Na and carbopol

Authors

  • Mohamad Andrie Tanjungpura University
  • Wintari Taurina Tanjungpura University

DOI:

https://doi.org/10.12928/pharmaciana.v11i1.18385

Keywords:

snakehead fish extract, kelulut honey, CMC-Na, Carbopol

Abstract

 

Snakehead fish (Channa striata) and kelulut honey (Trigona sp.) have the potential to accelerate the wound-healing process. These natural ingredients are formulated in the form of ointment because ointment is an external medicine that is easy to apply and has long contact with the skin. Previous research has shown that the snakehead fish extract ointment undergoes phase separation, so it needs a material that can bind the snakehead fish extract and kelulut honey as the active substances in the preparation. This study aimed to determine the effect of variations in the concentration of CMC-Na (3%, 4.5%, 6%) and Carbopol (0.5%, 1%, 2%) as a binder on the ointment physical properties and to determine the best snakehead fish (Channa striata) extract ointment formulation. The ointment of snakehead fish extract was tested for organoleptic, homogeneity, spreadability, and adhesion. The test results were analyzed by One Way ANOVA with a confidence level of 95%. The results showed that the higher the concentrations of CMC-Na and Carbopol used, the greater the adhesive power and the lower the spreadability. Ointment with Carbopol has a wider spreadability and a softer consistency than ointment with CMC-Na. The best formulation is shown by the Carbopol 0.5% (F4) formula, where the average spreadability with a load of 150 g is 5.09 cm and the average adhesion is 229 seconds.

References

Andrie, M., & Taurina, W. (2017). Uji aktivitas antibakteri secara in vivo berbagai ekstrak tanaman obat dalam bentuk sediaan salep, krim, dan gel pada tikus putih jantan (Rattus norvegicus) galur wistar. Dipa Untan.

Andrie, M., & Taurina, W. (2018). Uji aktivitas antibakteri beberapa tanaman obat secara in vitro. Dipa Untan.

Astuti, D. P., Husni, P., & Hartono, K. (2017). Formulasi dan uji stabilitas fisik sediaan gel antiseptik tangan minyak atsiri bunga lavender (Lavandula angustifolia Miller). Farmaka, 15(1), 176–184

Dewi, C. C., & Saptarini, N. M. (2016). Hidroksi propil metil selulosa dan karbomer serta sifat fisikokimianya sebagai gelling agent. Farmaka, 14(3), 1–13

Eka, B., Junianto, & Rochima, E. (2016). Pengaruh metode rendering terhadap karakteristik fisik, kimia dan organoleptik ekstrak kasar minyak ikan Lele. Jurnal Perikanan Kelautan, 7(1), 1–5

Gadekar, R., Saurabh, M. K., Thakur, G. S., & Saurabh, A. (2012). Study of formulation, characterisation and wound healing potential of transdermal patches of Curcumin. Asian Journal of Pharmaceutical and Clinical Research, 5(SUPPL.4), 225–230

Garlen, D. (1996). Toothpastes. In Pharmaceutical Dosage Forms: Dysperse Systems (pp. 423–442). Marcel Dekker Inc

Gorada, Taurina, W., & Andrie, M. (2019). Formulasi sediaan salep madu kelulut ( heterotrigona itama ) dan fase air ekstrak ikan gabus ( Channa Striata ). Jurnal Mahasiswa Farmasi Fakultas Kedokteran UNTAN, 4(Vol 4, No 1 (2019): Jurnal Farmasi Kalbar), 1–7. http://jurnal.untan.ac.id/index.php/jmfarmasi/article/view/33514

Gunawan, N. A. (2017). Madu : efektivitasnya untuk perawatan luka. Iai, 44(2), 138–142

Hariningtyas, R. A. (2015). Pengaruh asimetri informasi terhadap senjangan anggaran pendahuluan. Jurnal Nominal, IV(2), 73–87

Hasrawati, A., Famir, Y., & Mursyid, A. M. (2019). Formulasi dan evaluasi salep ekstrak daun gulma siam ( Chromolaena odorata L .) dengan variasi basis salep Formulasi dan evaluasi salep ekstrak daun gulma siam ( Chromolaena odorata L .) dengan variasi basis salep. As-Syifaa Jurnal Farmasi, 11(01), 55–60

Mukhlishah, N. R. I., Sugihartini, N., & Yuwono, T. (2016). Daya iritasi dan sifat fisik sediaan salep minyak atsiri bunga cengkeh (Syzigium Aromaticum) pada basis hidrokarbon. Majalah Farmasetik, 12(1), 372–376

Orsat, V., & Raghavan, G. S. V. (2006). Dehydration technologies to retain bioactive components. In Functional Food Ingredients and Nutraceuticals: Processing Technologies (pp. 173–192). CRC Press. https://doi.org/10.1201/9781420004076.ch7

Rowe, R., Sheskey, P., & Quinn, M. (2009). Handbook of Pharmaceutical Excipients. In London: Vol. E.28 (6th editio)

Sabale, P., Bhimani, B., Prajapati, C., & Sabalea, V. (2012). An overview of medicinal plants as wound healers. Journal of Applied Pharmaceutical Science, 2(11), 143–150. https://doi.org/10.7324/JAPS.2012.21127

Savitri, N. P. T., Hastuti, E. D., & Suedy, S. W. A. (2017). Kualitas madu lokal dari beberapa wilayah di kabupaten Temanggung. Buletin Anatomi Dan Fisiologi, 2(1), 58. https://doi.org/10.14710/baf.2.1.2017.58-66

Strauer, B. E. (2008). Acute myocardial infarction. Der Internist, 49(9), 1022–1022. https://doi.org/10.1007/s00108-008-2191-z

Tanwar, Y. S., & Jain, A. K. (2012). Formulation and evaluation of topical diclofenac sodium gel using different gelling agent. Asian Journal of Pharmaceutical Research and Health Care, 4(1), 1–6

Zulfa, E., Indah, F., & Murukmihadi, M. (2017). Optimasi Cmc-na dan karbomer sebagai pengikat pada formula pasta gigi triklosan secara Sld. E-Publikasi Fakultas Farmasi, 2012, 156–162

Downloads

Published

2021-03-31

Issue

Vol. 11 No. 1 (2021): Pharmaciana

Section

Pharmaceutics and Pharmaceutical Technology

License

Authors who publish with Pharmaciana agree to the following terms:

  1. Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. 
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.