Design and Implementation of a Smart, Interactive and Portable System for Monitoring of Human Vital Signs

Authors

  • Haider Ismael Shahadi Department of Electrical and Electronic Engineering, University of Kerbala
  • Maha Khalid Kadhim
  • Nawal Mousa Almeyali
  • Ali Thamir Hadi

DOI:

https://doi.org/10.26555/jiteki.v7i1.20209

Keywords:

Patient monitor, Smart system, human vital signs, Internet of things, ThingSpeak, ESP32-microcontroller, Electrocardiography (ECG), Heartbeat rate sensor, Body sensor

Abstract

Smart systems are characterized by their efficiency, high accuracy, and cost reduction. One of the important fields in which the smart system is used is health care, especially monitoring of human vital signs. In general, the conventional patient monitor is expensive, cannot be used for remote monitoring, and non-interactive. In many situations, it requires remote and portable monitoring for patients, such as in case of the area is outside the medical services, infected diseases (e.g., COVID-19, 20), and difficulties of a patient transferred. This paper proposes a smart, interactive, and portable monitor for vital human signs based on the internet of things (IoT). The proposed monitor is cheap and easy to use either directly by doctors and nurses or remotely by any person. The proposed system is designed using ESP32-microcontroller and vital-sign sensors. It measures three important vital signs, including heart rate, body temperature, and Electrocardiography (ECG), as well as the environment temperature of the patient. The measured signs can be monitored from anywhere in the world through a smartphone application in real-time. Furthermore, the doctor can send instructions and descriptions to the patients in real-time using the same phone application that is designed in this work.Smart systems are characterized by their efficiency, high accuracy, and cost reduction. One of the important fields in which the smart system is used is health care, especially monitoring of human vital signs. In general, the conventional patient monitor is expensive, cannot be used for remote monitoring, and non-interactive. In many situations, it requires remote and portable monitoring for patients, such as in case of the area is outside the medical services, infected diseases (e.g., COVID-19, 20), and difficulties of a patient transferred. This paper proposes a smart, interactive, and portable monitor for vital human signs based on the internet of things (IoT). The proposed monitor is cheap and easy to use either directly by doctors and nurses or remotely by any person. The proposed system is designed using ESP32-microcontroller and vital-sign sensors. It measures three important vital signs, including heart rate, body temperature, and Electrocardiography (ECG), as well as the environment temperature of the patient. The measured signs can be monitored from anywhere in the world through a smartphone application in real-time. Furthermore, the doctor can send instructions and descriptions to the patients in real-time using the same phone application that is designed in this work.

References

M. Glesner and F. Philipp, “Embedded systems design for smart system integration,†IEEE Computer Society Annual Symposium on VLSI (ISVLSI), 2013, pp. 32–33. https://doi.org/10.1109/ISVLSI.2013.6654611

R. Jadhav, R. Kulkarni, S. D. Perur, G. L. Kulkarni, and P. Kunchur, “Prominence of Internet of things with Cloud: A Survey,†International Journal of Emerging Research in Management &Technology, vol.6, Issue 2, pp. 40–43, 2017.

M. Talal et al., “Smart Home-based IoT for Real-time and Secure Remote Health Monitoring of Triage and Priority System using Body Sensors: Multi-driven Systematic Review,†Journal of Medical Systems, vol. 43, no. 3, pp. 2-43, 2019. https://doi.org/10.1007/s10916-019-1158-z

K. Mohanraj, N. Balaji, and R. Chithrakkannan, “IoT based patient monitoring system using raspberry pi 3 and Lab view,†Pakistan Journal of Biotechnology, vol. 14, pp. 337–343, 2017. https://doi.org/10.1109/ICOMET.2019.8673393

B.K Bhoomika., K. Muralidhara, “Secured Smart Healthcare Monitoring System Based on IOT,†International Journal on Recent and Innovation Trends in Computing and Communication, vol. 3, issue 7 pp. 4958–4961, 2017. https://doi.org/10.2139/ssrn.2941100

A. Singh, B. N. Naik, S. L. Soni, and G. D. Puri, “Real-Time Remote Surveillance of Doffing during COVID-19 Pandemic: Enhancing Safety of Health Care Workers,†Anesth. Analg, pp. E112–E113, 2020. https://doi.org/10.1213/ANE.0000000000004940

P. Valsalan1, T. Baomar, A. Baabood, “IoT based Health Monitoring System for Elderly People,†Journal of critical reviews, Vol 7, Issue 4, pp. 739-740, 2020. https://doi.org/10.31838/jcr.07.04.137

M. G. Ayoub, M. N. Farhan, and M. S. Jarjees, “Streaming in-patient BPM data to the cloud with a real-time monitoring system,†Telkomnika Journal, vol. 17, no. 6, pp. 3120–3125, 2019. https://doi.org/10.12928/telkomnika.v17i6.13263

A. Maier, A. Sharp, and Y. Vagapov, “Comparative analysis and practical implementation of the ESP32 microcontroller module for the internet of things,†IEEE Conference on Internet Technologies and Applications (ITA), 2017, pp. 143–148. https://doi.org/10.1109/ITECHA.2017.8101926

B. Mallick and A. K. Patro, “Heart Rate Monitoring System Using Finger Tip through Arduino and Processing Software,†International Journal of Engineering Research and Technology, vol.6, issue 13 , pp.1-4, 2018.

L. Dioren Rumpa, S. Suluh, I. Hendrika Ramopoly, and W. Jefriyanto, “Development of ECG sensor using arduino uno and e-health sensor platform: Mood detection from heartbeat,†Journal of Physics: Conference Series – IOPscience, vol. 1528, no. 1, 2020. https://doi.org/10.1088/1742-6596/1528/1/012043

G. Jin, X. Zhang, W. Fan, Y. Liu, and P. He, “Design of non-contact infrared thermometer based on the sensor of MLX90614,†Open Automation and Control Systems Journal, vol. 7, no. 1, pp. 8–20, 2015. https://doi.org/10.2174/1874444301507010008

M. Fezari and A. Al Dahoud, “Integrated Development Environment "IDE" For Arduino,†retrieved 2018, available online at: https://www.researchgate.net/publication/328615543_Integrated_Development_Environment_IDE_For_Arduino.

S. Pasha, “Thingspeak Based Sensing and Monitoring System for IoT with Matlab Analysis,†International Journal of New Technology and Research, vol. 2, no. 6, pp. 19–23, 2016.

E. W. Patton, M. Tissenbaum, and F. Harunani, MIT app inventor: Objectives, design, and development, in Computational thinking education, Springer, Singapore, 2019. https://doi.org/10.1007/978-981-13-6528-7_3

Downloads

Published

2021-04-13

How to Cite

[1]
H. I. Shahadi, M. K. Kadhim, N. M. Almeyali, and A. T. Hadi, “Design and Implementation of a Smart, Interactive and Portable System for Monitoring of Human Vital Signs”, J. Ilm. Tek. Elektro Komput. Dan Inform, vol. 7, no. 1, pp. 30–42, Apr. 2021.

Issue

Vol. 7 No. 1 (2021): April

Section

Articles

License

Authors who publish with JITEKI agree to the following terms:

  1. Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

Lisensi Creative Commons

This work is licensed under a Creative Commons Attribution 4.0 International License

Similar Articles

<< < 1 2 3 

You may also start an advanced similarity search for this article.