Arduino MKR Analysis Using the RTC Alarm Method

Authors

  • I Gusti Made Ngurah Desnanjaya Departement of System Computer , Institut Bisnis dan Teknologi Indonesia, Denpasar, Indonesia http://orcid.org/0000-0002-8811-6395
  • I Nyoman Saputra Wahyu Wijaya Department of Technic and Vocational, Universitas Pendidikan Ganesha, Singaraja, Indonesia
  • Wayan Gede Suka Parwita Departement Informatics Engineering, Institut Bisnis dan Teknologi Indonesia, Denpasar, Indonesia
  • I Made Aditya Nugraha Department of Fishery Mechanization, Marine and Fisheries Polytechnic of Kupang, Kupang East Nusa Tenggara, Indonesia

DOI:

https://doi.org/10.26555/jiteki.v8i3.23631

Keywords:

Arduino, real time clock (RTC), Arduino MKR Zero, Arduino MKR WAN 1300, Arduino MKR GSM 1400,

Abstract

The researcher analyzed the Real-Time Clock (RTC) alarm readings on the Arduino MKR Zero, Arduino MKR Wan 1300, and Arduino MKR GSM 1400. The Arduino MKR board compared the data with the accuracy of reading the RTC values. To support this research, experimental quantitative research methods were used, and an independent sample t-test was used. The use of this method is very suitable because this method displays numbers as data and also conducts experiments directly on the Arduino MKR board. Comparative measurement of the three MKR using the RTC Alarm get the average time difference. This average indicates the IC capability and accuracy of MKR. From the experimental results, MKR GSM 1400 has the greatest. Arduino MKR GSM 1400 is the Arduino MKR that has the fastest data response among the other two Arduino MKRs. So, to create or develop a project related to real-time data transmission, it is recommended to use the Arduino MKR GSM 1400.

Downloads

Published

2022-10-13

How to Cite

Desnanjaya, I. G. M. N., Wijaya, I. N. S. W., Parwita, W. G. S., & Nugraha, I. M. A. (2022). Arduino MKR Analysis Using the RTC Alarm Method. Jurnal Ilmiah Teknik Elektro Komputer Dan Informatika, 8(3), 376–387. https://doi.org/10.26555/jiteki.v8i3.23631

Issue

Vol. 8 No. 3 (2022): September

Section

Articles

License

Authors who publish with JITEKI agree to the following terms:

  1. Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.

Lisensi Creative Commons

This work is licensed under a Creative Commons Attribution 4.0 International License