Effective Treatment of Industrial Wastewater Contaminated with Mn and Pb using Mesoporous Silica from Yogyakarta Beach

Authors

  • Siti Salamah Universitas Ahmad Dahlan
  • Suhendra Suhendra Universitas Ahmad Dahlan

DOI:

https://doi.org/10.26555/chemica.v8i2.21952

Keywords:

Adsorbstion, Liquid Waste, Mesoporous Silica, Timbal (Pb)

Abstract

The research was investigated using Yogyakarta beach sand as the main material to synthesize mesoporous silica (MS). The MS usage in the environmental field is mainly to overcome water pollution, contaminated from chemical waste used in industrial productions. In the sol-gel method, the silica from beach sand was extracted and synthesized into MS using a dodecyl amine (DDA) template. MS is used as an adsorbent for manganese (Mn) and lead (Pb) printing liquid waste. MS produced was analyzed with FTIR and surface area analyzer (SAA). The process of waste adsorption used MS weight variables of 1 gr, 2 gr, and 3 gr. The MS was mixed in the waste and stirred with a rotation speed of 120 rpm for 2 hours. The solution was left for 24 hours until separated from the adsorbent. AAS analyzed the resulting liquid, and the adsorbent was dried at 100 °C for 24 hours and analyzed by SEM-EDX. The synthesized MS was characterized. It has a surface area of 122.78 m2/gr and a pore diameter of 4.65 nm. The AAS analysis results showed that the wastewater contains Ni <0.076 mg/L and Pb <0.415 mg/L. The SEM-EDX analysis showed that the adsorbent used contains 0.01% Mn, 0.01% Pb, and 0.39% Cu. The research showed that the liquid printing waste analyzed contains nickel, lead, and copper.

Author Biographies

Siti Salamah, Universitas Ahmad Dahlan

Program Studi Teknik Kimia

Suhendra Suhendra, Universitas Ahmad Dahlan

Program Studi Teknik Kimia

References

A. Grbeš, “A Life Cycle Assessment of Silica Sand : Comparing the Beneficiation Processes,†no. September 2015, 2016.

Françoise Rouquerol, J. Rouquerol, and K. Sing, Adsorption by Powders and Porous Solids. Principles, Methodology and Applications. Elsevier Ltd., 1999.

I. Slate, F. Z. Elberrichi, J. Duplay, N. El, H. Fardjaoui, and A. Guendouzi, “Mesoporous silica synthesized from natural local kaolin as an effective adsorbent for removing of Acid Red 337 and its application in the treatment of real industrial textile effluent,†2020.

S. Salamah, Wega TS, Indriana Kartini, Suryo P. “Hydrocracking of Waste Cooking Oil into Biofuel Using Mesoporous Silica from Parangtritis Beach Sand Synthesis by Sonochemistry,†pp. 1–19, Silicon Journal, 2021.

H. Chaudhuri, S. Dash, and A. Sarkar, “Synthesis and use of SBA-15 adsorbent for dye-loaded wastewater treatment,†J. Environ. Chem. Eng., vol. 3, no. 4, pp. 2866–2874, 2015.

D. A. Giannakoudakis et al., “Enhanced uranium removal from acidic wastewater by phosphonate-functionalized ordered mesoporous silica : Surface chemistry matters the most,†vol. 413, no. October 2020, 2021.

H. Kim, H. Yang, D. Chung, I. Yang, Y. J. Choi, and J. Moon, “Functionalized Mesoporous Silica Membranes for CO 2 Separation Applications,†vol. 2015, 2015.

X. Liu, J. Li, and L. Zhou, “Adsorption of CO2, CH4 and N2 on ordered mesoporous silica molecular sieve,†Chem. Phys. Lett., vol. 415, pp. 198–201, 2005.

P. S. Shinde et al., “A Brief Overview of Recent Progress in Porous Silica as Catalyst Supports,†pp. 1–17, 2021.

J. Antonio, C. Id, C. Garc, and C. Pilar, “Porous Silicon-Based Catalysts for the Dehydration of Glycerol to High Value-Added Products,†no. Table 1, pp. 1–19, 2018.

A. Bernardos and L. Kouřimská, “Applications of Mesoporous Silica Materials in Food – a Review,†vol. 31, no. 2, pp. 99–107, 2013.

M. Jensen, R. Keding, and T. Ho, “Biologically Formed Mesoporous Amorphous Silica,†no. 17, pp. 2717–2721, 2009.

W. Gao, Y. Wang, F. Zhang, S. Zhang, and H. Lian, “Talanta Tetrasulfonate Calix [ 4 ] arene modified large pore mesoporous silica microspheres : Synthesis, characterization, and application in protein separation,†Talanta, vol. 226, no. January, p. 122171, 2021.

D. Yuan, C. M. Ellis, and J. J. Davis, “Mesoporous Silica Nanoparticles in Bioimaging,†pp. 16–18, 2020.

C. Xu, C. Lei, and C. Yu, “Mesoporous Silica Nanoparticles for Protein Protection and Delivery,†vol. 7, no. May, pp. 1–12, 2019.

R. Wang et al., “An Economic Method for Synthesis of Highly Ordered Supermicroporous Silica,†2013.

M. Elma et al., “Carbon templated strategies of mesoporous silica applied for water desalination : A review,†J. Water Process Eng., vol. 38, no. July 2020.

Y. Shu et al., “Microporous and Mesoporous Materials Synthesis and characterization of Ni-MCM-41 for methyl blue adsorption,†Microporous Mesoporous Mater., vol. 214, pp. 88–94, 2015.

J. Hong, B. Lin, J. Jiang, B. Chen, and C. Chang, “Synthesis of pore-expanded mesoporous materials using waste quartz sand and the adsorption effects of methylene blue,†J. Ind. Eng. Chem., 2014.

A. A. Siyal et al., “A Review on Geopolymers as Emerging Materials for the,†J. Environ. Manage., 2018.

S. Tighadouini et al., “Removal of toxic heavy metals from river water samples using a porous silica surface modified with a new β -ketoenolic host,†no. Ii, pp. 262–273, 2019.

F. Bucatariu et al., “Removal and separation of heavy metal ions from multi-component simulated waters using silica/polyethyleneimine composite microparticles,†2020.

W. Yantasee, R. D. Rutledge, W. Chouyyok, V. Sukwarotwat, C. Timchalk, and R. S. Addleman, “NIH Public Access,†vol. 2, no. 10, pp. 2749–2758, 2012.

W. Yantasee et al., “Functionalized Nanoporous Silica for the Removal of Heavy Metals from Biological Systems : Adsorption and Application,†vol. 2, no. 10, pp. 2749–2758, 2010.

M. Karni, A. Kabbani, H. Holail, and Z. Olama, “Heavy Metals Removal Using Activated Carbon, Silica and Silica Activated Carbon Composite,†Energy Procedia, vol. 50, pp. 113–120, 2014.

A. Thanarasu, K. Periyasamy, P. Manickam, and T. Devaraj, “Materials Today : Proceedings Comparative studies on adsorption of dye and heavy metal ions from effluents using eco-friendly adsorbent,†Mater. Today Proc., no. xxxx, pp. 1–7, 2020.

C. Zampeta, K. Bertaki, I. Triantaphyllidou, Z. Frontistis, and D. V Vayenas, “Treatment of real industrial-grade dye solutions and printing ink wastewater using a novel pilot-scale hydrodynamic cavitation reactor,†J. Environ. Manage., vol. 297, no. July, p. 113301, 2021.

S. Wadhawan, A. Jain, J. Nayyar, and S. Kumar, “Journal of Water Process Engineering Role of nanomaterials as adsorbents in heavy metal ion removal from wastewater : A review,†J. Water Process Eng., vol. 33, no. June 2019, p. 101038, 2020.

P. K. Singh and K. Sharma, “Materials Today : Proceedings Mesoporous silica Nanomaterial : An overview,†Mater. Today Proc., vol. 45, pp. 3458–3461, 2021.

S. Nuntang, S. Yousatit, S. Chaowamalee, T. Yokoi, T. Tatsumi, and C. Ngamcharussrivichai, “Mesostructure natural rubber in situ formed silica nanocomposites: A simple way to prepare mesoporous silica with hydropohobic properties,†Microporous Mesoporous Mater., 2017.

E. Da, “Adsorption of heavy metals on functionalized-mesoporous silica: A review,†Microporous Mesoporous Mater., 2017.

Downloads

Published

2022-01-07