Effect of Temperature, Concentration, and Type of Plasticizer on Edible Pectin Film Characteristics of Mango Peel (Mangifera indica L.)

Authors

  • Eka Wahyu Asriyanti Universitas Muhammadiyah Surakarta
  • Muna Munisah Universitas Muhammadiyah Surakarta
  • Erlando Rizki Dewanto Universitas Muhammadiyah Surakarta
  • Muhammad Mujiburohman Universitas Muhammadiyah Surakarta

DOI:

https://doi.org/10.26555/chemica.v9i1.20540

Keywords:

Edible film, Pectin, Plasticizer

Abstract

Plastic is a polymer product that is widely used by the community and is generally non-degradable. Its high usage makes plastic a source of waste that is difficult to decompose. It is important to transform the use of degradable materials as packaging by the community in an effort to overcome plastic waste. The edible film is an environmentally friendly packaging medium, which is generally synthesized from a mixture of pectin, plasticizer, and tapioca starch by heating and stirring. This study aims to study the effect of mixing temperature, pectin concentration, and type of plasticizer on the characteristics of the edible film. The temperature was varied at 70 oC, 80 oC, and 90 oC, with variations in pectin concentrations of 1%, 2%, and 3%. The types of plasticizers used were glycerol, sorbitol, and polyethylene glycol (PEG 400). The characteristics of the edible film were tested from thickness, tensile strength, elongation, and solubility. In the range of variables studied, the optimum conditions for producing the best edible film characteristics were 70 oC, 3% pectin, and the plasticizer of glycerol, giving solubility of 0.670 g water/g edible film, the thickness of 0.392 mm, the tensile strength of 3.200 MPa, and elongation of 0.134.

Author Biographies

Eka Wahyu Asriyanti, Universitas Muhammadiyah Surakarta

Program Studi Teknik Kimia, Fakultas Teknik, Universitas Muhammadiyah Surakarta

Muna Munisah, Universitas Muhammadiyah Surakarta

Program Studi Teknik Kimia, Fakultas Teknik, Universitas Muhammadiyah Surakarta

Erlando Rizki Dewanto, Universitas Muhammadiyah Surakarta

Program Studi Teknik Kimia, Fakultas Teknik, Universitas Muhammadiyah Surakarta

Muhammad Mujiburohman, Universitas Muhammadiyah Surakarta

Program Studi Teknik Kimia, Fakultas Teknik, Universitas Muhammadiyah Surakarta

References

A. N. A.J, B. A. Harsojuwono, And I. W. Arnata, “Pengaruh Jenis Dan Konsentrasi Bahan Pemlastis Terhadap Bioplastik Glukomanan,†J. Rekayasa Dan Manaj. Ind., Vol. 9, No. 1, Pp. 75–84, 2021.

T. Bourtoom, “Edible Films And Coatings : Characteristics And Properties,†Int. Food Res. J., Vol. 15, No. 3, Pp. 237–248, 2008.

R. Nurdiani, H. S. Yufidasari, And J. S. Sherani, “Karakteristik Edible Film Dari Gelatin Kulit Ikan Kakap Merah ( Lutjanus Argentimaculatus ) Dengan Penambahan Pektin,†Jphpi, Vol. 22, No. 1, 2019.

R. Krisnadi, Y. Handarni, And K. Udyani, “Pengaruh Jenis Plasticizer Terhadap Karakteristik Plastik Biodegradable Dari Bekatul Padi,†Semin. Nas. Sains Dan Teknol. Terap. Vii, No. 100, Pp. 125–130, 2019.

I. Lesmana, A. Ali, And V. S. Johan, “Variasi Konsentrasi Pektin Kulit Durian Terhadap Karakteristik Fisik Dan Mekanik Edible Film Dari Pati Ubi Jalar Ungu,†Jom Faperta, Vol. 4, No. 2, P. 656, 2017.

D. M. Amaliyah, “Pemanfaatan Limbah Kulit Durian ( Durio Zibethinus ) Dan Kulit Cempedak ( Artocarpus Integer ) Sebagai Edible Film,†J. Ris. Ind. Has. Hutan, Vol. 6, No. 1, Pp. 27–34, 2014.

N. Febriyanti, M. Wiharto, And Lahming, “Pengaruh Lama Pengeringan Dan Berbagai Jenis Gula Terhadap Kualitas Manisan Tomat (Lycopersium Esculentum),†J. Pendidik. Teknol. Pertan., Vol. 4, No. 1, Pp. 86–94, 2018.

A. S. Injilauddin, M. Lutfi, And W. A. Nugroho, “Pengaruh Suhu Dan Waktu Pada Proses Ekstraksi Pektin Dari Kulit Buah Nangka ( Artocarpus Heterophyllus ),†Jurrnal Keteknikan Pertan. Trop. Dan Biosist., Vol. 3, No. 3, Pp. 280–286, 2015.

Nurmila, Nurhaeni, And A. Ridhay, “Waktu, Ekstraksi Dan Karakterisasi Pektin Dari Kulit Buah Mangga Harumanis (Mangifera Indica L.) Berdasarkan Variasi Suhu Dan Waktu,†J. Ris. Kim., Vol. 5, No. April, Pp. 58–67, 2019.

S. Sutono, Budidaya Tanaman Mangga (Mangifera Indica). Bogor: Balai Penelitian Tanah Badan Penelitian Dan Pengembangan Pertanian, 2008.

D. Huri And F. C. Nisa, “Pengaruh Konsentrasi Gliserol Dan Ekstrak Ampas Kulit Apel Terhadap Karakteristik Fisik Dan Kimia Edible Film. The Effect Of Glycerol And Apple Peel Waste Extract Concentration On Physical And Chemical Characteristic Of Edible Film,†Pangan Dan Agroindustri, Vol. 2, No. 4, Pp. 29–40, 2014.

G. I. Olivas And G. V Barbosa-Canovas, “Alginate-Calcium Films: Water Vapour Permeability And Mechanical Properties As Affected By Plasticizer And Relative Humidity,†Lwt-Food Sci. Technol., Vol. 41, No. 2, Pp. 359–366, 2008.

N. Imanningsih, “Profil Gelatinisasi Beberapa Formulasi Tepung-Tepungan Untuk,†Panel Gizi Makan, Vol. 35, No. 1, Pp. 13–22, 2012.

T. H. Mchugh, R. Avena-Bustilos, And J. M. Krochta, “Hydrophilic Edible Films: Modified Procedure For Water Vapor Permeability And Explanation Of Thickness Effects,†J. Food Sci., Vol. 58, No. 4, Pp. 899–903, 1993.

A. J. W. S. Sitompul And E. Zubaidah, “Pengaruh Jenis Dan Konsentrasi Plasticizer Terhadap Sifat Fisik Edible Film Kolang Kaling ( Arenga Pinnata ) The Influence Of The Type And Concentration Of Plasticizer Toward The Physical Characteristic Of Edible Film From Palm Fruit (Arenga Pinnata),†Vol. 5, No. 1, Pp. 13–25, 2017.

F. Yulistiani, N. Khairunisa, And R. Fitiana, “The Effect Of Glycerol Concentration And Breadfruit Flour Mass On Edible Film Characteristics,†J. Phys. Conf. Ser., Vol. 1450, No. 1, 2020.

M. F. Carvera Et Al., “Solid State And Mechanical Properties Of Aqueous Chitosan Amylase Starch Films Plasticized With Polyols,†Apps Pharm. Sci. Technol, Vol. 5, No. 1, Pp. 1–6, 2004.

P. Haryanti, R. Setyawati, And R. Wicaksono, “Pengaruh Suhu Dan Lama Pemanasan Suspensi Pati Serta Effect Of Temperature And Time Of Heating Of Starch And Butanol Concentration On The Physicochemical,†Agritech, Vol. 34, No. 3, Pp. 308–315, 2014.

F. J. Polnaya, N. D. J. Alfons, And A. Souripet, “Karakteristik Edible Film Komposit Pati Sagu Molat-Pektin,†Bul. Palma, Vol. 20, No. 2, Pp. 111–118, 2019, Doi: 10.21082/Bp.V20n2.2019.111-118.

A. Rifqiani, R. Desnita, And S. Luliana, “Pengaruh Penggunaan Peg 400 Dan Gliserol Sebagai Plasticizer Terhadap Sifat Fisik Sediaan Patch Ekstrak Etanol Herba Pegagan,†J. Mhs. Farm. Fak. Kedokt. Untan, Vol. 4, No. 1, Pp. 1–10, 2019.

Y. Darni And H. Utami, “Studi Pembuatan Dan Karakteristik Sifat Mekanik Dan Hidrofobisitas Bioplastik Dari Pati Sorgum,†J. Rekayasa Kim. Lingkung., Vol. 7, No. 4, Pp. 88–93, 2009.

T. I. Sari, H. P. Manurung, And F. Permadi, “Pembuatan Edible Film Dari Kolang Kaling,†J. Tek. Kim., Vol. 15, No. 4, Pp. 27–35, 2008.

V. Andriasty, D. Praseptiangga, And R. Utami, “Pembuatan Edible Film Dari Pektik Kulit Pisang Raja Bulu (Musa Sapientum Var Paradica Baker) Dengan Penambahan Minyak Atsiri Jahe Emprit (Zingebir Officinalle Var. Amarum) Dan Aplikasinya Pada Tomat Cherry (Lycopersiconesculentum Var. Cerasiforme),†J. Teknosains Pangan, Vol. 4, No. 4, Pp. 1–7, 2015.

W. Murdianto, “Sifat Fisik Dan Mekanik Edible Film Eksrak Daun Janggelan,†J. Agrosains, Vol. 18, No. 3, Pp. 1–10, 2005.

Downloads

Published

2022-04-11

Issue

Vol. 9 No. 1 (2022): April 2022

Section

Articles

License

Chemica: Jurnal Teknik Kimia allows readers to read, download, copy, distribute, print, search, or link to its articles' full texts and allows readers to use them for any other lawful purpose. The journal allows the author(s) to hold the copyright without restrictions. Finally, the journal allows the author(s) to retain publishing rights without restrictions

  • Authors are allowed to archive their submitted articles in an open access repository
  • Authors are allowed to archive the final published article in an open access repository with an acknowledgment of its initial publication in this journal

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 Generic License.

Â