PENERAPAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) DALAM MENGIDENTIFIKASI MASALAH KERUSAKAN PRODUK PAKAN AYAM PADA PT. JAPFA COMFEED INDONESIA, TBK UNIT LAMPUNG
DOI:
https://doi.org/10.12928/si.v17i1.9641Keywords:
CMFE, FMEA, Peta kendali p, RPNAbstract
PT. Japfa Comfeed Indonesia, Tbk Unit Lampung is a company engaged in the field of animal feed with two types of products, namely pellet and crumble. The real condition that often occurs in this company is that there is a final product that has problems in animal feed that is not in accordance with predetermined quality standards. The purpose of this study is to analyze failures that cause product defects by using the Failure Mode and Effect Analysis (FMEA) method, getting the risk of the biggest production process failure in the RPN (Risk Priority Number) value, and proposing improvements for subsequent production. The method used in this study uses statistical tools in the form of check sheets, p control maps and Cause Failure Mode Effect (CMFE) analysis. The results of the control chart analysis show that chicken feed is within the control limit, and the highest Risk Priority Number (RPN) value is the filter with a value of 100 RPN so that the pellet can pass the final stage. To overcome this problem, the proposed improvement is to add a filter to the crumble machine and then carry out routine maintenance and inspection.References
Assauri, Sofjan. 1993. Manajemen Produksi dan Operasi. Jakarta : Fakultas Ekonomi Universitas Indonesia.
Chase, Richard B., Nicholas J. Aquilano and F. Robert Jacobs. 2001. Operations Management For Competitive Adventage 9th Edition. New York : McGraw-Hill Companies.
Heizer, Jay and Barry Render. 2006. Operations Management (Edisi Terjemahan). Jakarta : Salemba Empat.
Hofmann, A., & Oldehaver, G. (2016). Vertically linked industries, product quality and minimum quality standards. German Economic Review, 17(1), 92-103.
Irianto, Drajat. 2010. Failure Mode & Effect Analysis. Bandung : Manufacturing Systems Research Group ITB.
Kim, K. O., & Zuo, M. J. (2018). General model for the risk priority number in failure mode and effects analysis. Reliability Engineering & System Safety, 169, 321-329.
Klochkov, Y., Its, A., & Vasilieva, I. (2016). Development of FMEA method with the purpose of quality assessment of can stock production. In Key Engineering Materials (Vol. 684, pp. 473-476). Trans Tech Publications.
Lawrence, X. Y., Akseli, I., Allen, B., Amidon, G., Bizjak, T. G., Boam, A., ... & Furness, S. (2016). Advancing product quality: a summary of the second FDA/PQRI conference.
Liu, H. C. (2016). FMEA using uncertainty theories and MCDM methods. In FMEA using uncertainty theories and MCDM methods (pp. 13-27). Springer, Singapore.
Montgomery, Douglas C. 2001. Introduction to Statistical Quality Control. 4th Edition. New York : John Willey & Sons, Inc.
Moubray, John. 1997. Reliability Centered Maintenance. Second Edition. New York : Industrial Press Inc.
Nasution, M.N. 2005. Manajemen Mutu Terpadu. Bogor : Ghalia Indonesia.
Roy, S., Modak, N., & Dan, P. K. (2017). Product quality as factors and measures for new product development success in Indian manufacturing industries. Materials Today: Proceedings, 4(2), 1385-1393.
Schroeder, Roger G. 2007. Manajemen Operasi. Jilid Dua Edisi Ketiga. Jakarta : Penerbit Erlangga.
Weckenmann, A., Akkasoglu, G., & Werner, T. (2015). Quality management–history and trends. The TQM Journal, 27(3), 281-293.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
