Pengimplementasian Sensor Suhu dan Atmega32 pada Simulasi Penyiraman Tanaman Secara Otomatis

Authors

  • Rizma Reza Elfariadi Universitas Amikom Yogyakarta
  • Yulia Nur Santi Universitas AMIKOM Yogyakarta

DOI:

https://doi.org/10.12928/jstie.v8i1.13651

Keywords:

Penyiram, Mikrokontroler Atmega32, Suhu, Kelembaban

Abstract

Penyiraman tanaman merupakan pekerjaan yang biasa dilakukan setiap hari, pekerjaan manual ini biasanya mengalami berbagai permasalahan ketika pekerjaan dilakukan. Salah satu permasalahan yang paling serius yaitu permasalahan kuantitas (jumlah) air. Jika pemantauan ini tidak dilakukan maka dapat terjadi bahwa tanaman yang dirawat bias mengalami kelebihan ataupun kekurangan air, sehingga mengakibatkan kematian. Untuk mengatasi masalah itu dibuatlah alat dengan chip microcontrolloler Atmega32 dengan sensor kelembaban, suhu dan alarm. Sensor kelembaban dan suhu (LM35) mendeteksi sebepa lembab tanah dan suhu sekitar kemudian mengirimkan sinyal kepada atmega32 untuk diproses. kemudian atmega mengirimkan data pada lcd atau LM016L yang akan mengeluarkan output berupa suhu dan pemberitahuan penyiraman.

References

Sensor Kelembaban dan Suhu http://eprints.polsri.ac.id/4643/3/FILE%203.%20BAB%20II.pdf ) di akses 03 Mei 2019

Pengertian dan Cara Kerja Motor DC ttps://teknikelektronika.com/pengertian-motor-dc- prinsip-kerja-dc-motor/ di akses 03 Mei 2019

Mikrokontrolet Atmega32 (http://blog.unnes.ac.id/antosupri/tentang-mikrokontroler- atmega32/ ) di akses 03 Mei 2019 (https://kurangsangu.wordpress.com/2011/04/24/membaca-rtc-ds1307-dengan-codevision- avr/ ) di akses 4 mei 2019.

Downloads

Published

28-02-2020

Issue

Vol. 8 No. 1 (2020): Februari

Section

Articles

License

License and Copyright Agreement

In submitting the manuscript to the journal, the authors certify that:

  1. They are authorized by their co-authors to enter into these arrangements.
  2. The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal. Please also carefully read Journal Posting Your Article Policy.
  3. The work is not under consideration for publication elsewhere.
  4. The work has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
  5. They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
  6. They agree to the following license and copyright agreement.


Copyright

Authors who publish with Jurnal Sarjana Teknik Informatika agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.