Investigasi level miskonsepsi pada Hukum III Newton
DOI:
https://doi.org/10.12928/jrkpf.v5i1.8625Abstract
Penelitian ini bertujuan untuk memberikan gambaran bentuk miskonsepsi dan seberapa tinggi miskonsepsi yang dimiliki oleh siswa kelas IX SMP Negeri di Pandeglang, Banten. Sampel yang dilibatkan dipilih secara purposive sampling dengan memilih responden yang telah mempelajari materi Hukum III Newton. Data penelitian yang diperoleh dianalisis secara deskriptif dan diolah untuk dikategorikan berdasarkan interval miskonsepsi. Instrumen yang dipakai dalam pengambilan data berupa tes diagnostik bertingkat tiga (three tier-tests) dan lembar konsepsi Hukum III Newton. Hasil penelitian menunjukkan bahwa seluruh responden mengalami miskonsepsi pada materi Hukum III Newton dengan rerata persentase 67.5 % (kategori sedang). Data ini menunjukkan bahwa lebih dari separuh siswa pada sekolah sampel di Kab. Pandeglang mengalami miskonsepsi pada Hukum III Newton. Diharapkan data ini menjadi dasar untuk peneliti selanjutnya agar mengatasi miskonsepsi serta menggali miskonsepsi Hukum I Newton maupun Hukum II Newton.
This research aim is to give a clear description of misconception and the level of misconception on Newton Third Laws that was held by students (9th grade) in public junior high school in Pandeglang, Banten. The sample involved was chosen by purposive sampling from the student who has learned the Newton's Third Laws. Data was analyzed to be categorized based on the misconception interval descriptively. Instruments that used in this study was a three-tier data (three tier-tests) and the conception sheet. The results showed that all of the 9th-grade students (as the respondent in that school) were have the misconception of Newton's Third Laws (percentage of 67.5%; medium category). It is suggested to the next researchers to overcome these misconceptions or finding the other form of misconceptions from Newton's 2nd Laws and Newton's 1st Laws.
Kata kunci: Miskonsepsi, level miskonsepsi, Hukum III Newton
References
R. Muliyani, I. Kaniawati, and L. Hasanah, “The Three-Tier Test (TTT) for Identify the Quantity of Student’s Misconception on Archimedes’s Laws,†in Proceedings International Seminar on Mathematics, Science and Computer Science Education. Section: Physics and Physics Education, 2015, pp. 314–318.
R. Muliyani and I. Kaniawati, “Identification of Quantity Students ’ Misconceptions on Hydrostatic Pressure with Three Tier-Test,†in FULL PAPER PROCEEDING GTAR- 2015, 2015, vol. 2, pp. 716–720.
P. R. Artiawati, R. Mulyani, and Y. Kurniawan, “Identifikasi Kuantitas Siswa Yang Miskonsepsi Menggunakan Three Tier-Test Pada Materi Gerak Lurus Beraturan (GLB),†JIPF (Jurnal Ilmu Pendidik. Fis., vol. 1, no. 1, pp. 13–15, 2016.
R. Silviany, R. Muliyani, and Y. Kurniawan, “Penerapan Three Tier-Test Untuk Identifikasi Kuantitas Siswa yang Miskonsepsi Pada Materi Magnet,†J. Ilmu Pendidik. Fis., vol. 2, no. 1, pp. 10–11, 2017.
S. Stocklmayer, J. P. Rayner, and M. M. Gore, “Changing the Order of Newton’s Laws—Why & How the Third Law Should be First,†Phys. Teach., vol. 50, no. 7, p. 406, 2012.
Y. Kurniawan and A. Suhandi, “The Three Tier-Test for Identification The Quantity of Students’ Misconception on Newton’s First Laws,†in FULL PAPER PROCEEDING GTAR- 2015, 2015, vol. 2, pp. 313–319.
J. Lutz, K. Sylvester, K. Oliver, and D. Herrington, “3, 2, 1 … Discovering Newton’s Laws,†Phys. Teach., vol. 55, no. 1, pp. 149–151, 2017.
Gsenviro, Explain how a force may produce a change in size or shape of an object? " eNotes, 10 Jan 2016,
Website:
https://www.enotes.com/homework help/explain-that-force-may-produce-change-size-shape-578065. Diakses tanggal 16 Januari 2018.
Downloads
Published
Issue
Section
License
COPYRIGHT TRANSFER FORM
The copyright to this article is transferred to Universitas Ahmad Dahlan (UAD) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UAD. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
- This paper has not been published in the same form elsewhere.
- It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
- A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UAD. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, micro form, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
- Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
- Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UAD copyright notice are indicated, the copies are not used in any way that implies UAD endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
- Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
