Pengembangan media pembelajaran video stop motion materi fluida statis
DOI:
https://doi.org/10.12928/jrkpf.v7i1.14625Abstract
Abstrak. Penelitian dan pengembangan ini bertujuan untuk mengetahui kelayakan media pembelajaran video Stop Motion dalam pembelajaran fisika materi fluida statis berdasarkan penilaian ahli materi dan ahli media. Model pengembangan yang digunakan dalam penelitian ini adalah model ADDIE. Subyek Penelitian adalah peserta didik kelas XI SMA. Instrumen berupa angket respon peserta didik. Berdasarkan analisis data diperoleh: validasi kelayakan video Stop Motion oleh dosen ahli materi memperoleh skor 4,3 dalam kategori baik, sedangkan uji relibilitas menunjukkan percentage agreement sebesar 86,6 % (reliabel). Sedangkan hasil dari validasi kelayakan video Stop Motion oleh ahli media memperoleh skor 4,1 dalam kategori baik, sedangkan uji relibilitas menunjukkan percentage agreement sebesar 83,1 % (reliabel). Dapat disimpulkan bahwa video Stop Motion materi fluida statis sangat layak dan dapat digunakan sebagai alternatif media pembelajaran Fisika.
Kata kunci: media pembelajaran, video stop motion, fluida statis
Abstract. The research and development aim to determine the feasibility of Stop Motion video learning media. This study refers to the ADDIE development model. As the subject of the study were students of class XI of SMA. The instruments used in the study were student questionnaire responses. Based on the data analysis of the study obtained: the feasibility validation of stop motion video by material expert scored 4,3 in the very good category, while reliability testing showed a percentage agreement of 86.6%, (reliable); the results of the feasibility validation of stop motion video by media expert scored 4,1 in the very good category, while reliability testing showed a percentage agreement of 83.1%, (reliable). It can be concluded appropriately and can be used as an alternative to Physics Learning Media.
Keywords: learning media, stop motion video, static fluids
References
Permendikbud Nomor 65, Tentang Standar proses pendidikan dasar dan menengah, Jakarta: Depdiknas, 2013.
Daryanto, Media Pembelajaran Peranannya Sangat Penting dalam Mencapai Tujuan Pembelajaran, Yogyakarta: Gava Media, 2016.
A. Muhson, "Pengembangan media pembelajaran berbasis teknologi informasi," Jurnal Pendidikan Akuntansi Indonesia, vol. 8, no. 2, 2010.
B. Purwanti, "Pengembangan Media Video Pembelajaran Matematika Dengan Model ASSURE," Jurnal Kebijakan dan Pengembangan Pendidikan, vol. 3, no. 1, 2015.
A. S. Ranang, H. Basnendar and N. P. Asmoro, Animasi Kartun dari Analog Sampai Digital, Jakarta: Indeks, 2010.
R. A. Nugroho, W. Wakidi and S. Arif, " Media Pembelajaran Gambar Dengan Animasi Stopmotion Pada Mata Pelajaran Sejarah Kelas XI," Pesagi (Jurnal Pendidikan dan Penelitian Sejarah), vol. 4, no. 3, 2016.
D. S. Asyhar, "Penggunaan Compact Disc (CD) Pembelajaran Stop Motion Animation sebagai Media Pembelajaran Materi Gerak Pada Tumbuhan di SMP 2 Bukateja," in Doctoral dissertation, Universitas Negeri Semarang, 2013.
R. Moreno and R. E. Mayer, "Animation as an aid to multimedia learning," Educational Psychology Review, vol. 14, no. 1, pp. 87-98, 2002.
G. Hoban and W. Nielsen, "Creating a narrated stop-motion animation to explain science: The affordances of “Slowmation†for generating discussion," Teaching and Teacher Education, vol. 42, pp. 68-78, 2014.
K. T. Sun, C. H. Wang and M. C. Liu, "Stop-motion to Foster Digital Literacy in Elementary School," Comunicar, vol. 25, no. 51, pp. 93-103, 2017.
Giancoli, Fisika Edisi 5 Jilid 1, Jakarta: Erlangga, 2001.
Sugiyono, Metode Penelitian Pendidikan Pendekatan kuantitatif, Kualitatif, dan R&D, Bandung: Alfabeta, 2010.
E. Mulyatiningsih, Metode Penelitian Terapan Bidang Pendidikan, Bandung: Alfabeta, 2012.
Riduwan, Skala Pengukuran Variabel-ariabel, Bandung: Alfabeta, 2013.
Downloads
Published
Issue
Section
License
COPYRIGHT TRANSFER FORM
The copyright to this article is transferred to Universitas Ahmad Dahlan (UAD) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UAD. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
- This paper has not been published in the same form elsewhere.
- It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
- A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UAD. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, micro form, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
- Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
- Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UAD copyright notice are indicated, the copies are not used in any way that implies UAD endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
- Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
