Pengembangan modul komputasi fisika untuk mahasiswa jurusan kependidikan
DOI:
https://doi.org/10.12928/jrkpf.v6i1.13395Abstract
Telah dilakukan pengembangan berupa modul petunjuk praktikum komputasi fisika yang ditujukan khusus untuk mahasiswa jurusan kependidikan. Modul ini hadir sebagai jawaban atas rumusan capaian pembelajaran yang dilakukan oleh Physical Society of Indonesia (PSI). Selain itu, modul ini juga sebagai bahan sumber belajar khususnya untuk mata kuliah komputasi fisika pada jurusan kependidikan. Modul ini dikembangkan berdasarkan hasil adaptasi model pengembangan Borg and Gall, Dick and Carey, serta Allessi and Trollip, hanya saja tahapan yang dilakukan hanya sampai tahap keenam. Hasil validasi oleh ahli materi menempatkan modul ini dalam kategori baik, sedangkan ahli media mengkategorikan nilai untuk modul ini sangat baik. Dalam rangka melihat respon pengguna, modul ini telah diujicobakan dengan skala terbatas kepada beberapa mahasiswa menggunakan instrumen USE Questionnaire. Pengguna menilai bahwa modul ini sangat baik dan layak untuk digunakan dalam perkuliahan komputasi fisika.
The development has been carried out consisting of modules on computational physics practicum intended specifically for students majoring in education. This module is present as an answer to the formulation of learning outcomes carried out by the Physical Society of Indonesia (PSI). In addition, this module is also a special learning resource for physics compatibility courses in the education department. This module was developed based on the adaptation model of Borg and Gall, Dick and Carey's development, and Allessi and Trollip, except that the development was carried out only until the sixth drunk. The results of the validation by the material expert put this module in a good category, while the media experts categorized the values for this module very well. In order to look at user responses, this module has been approved to try with a limited scale for some students using the USE Questionnaire instrument. Users consider this title very good and worthy of being used in computational physics lectures.
Kata kunci: modul komputasi fisika, modul praktikum
References
Borg, W. & Gall, M., 1989. Educational Research: An Introduction, Fifth Edition. New York: Longman.
Fitri, U. R., Desnita & Handoko, E., 2015. Pengembangan Modul Berbasis Discovery-Inquiry untuk Fisika SMA Kelas XII Semester 2. JPPPF - Jurnal Penelitian & Pengembangan Pendidikan Fisika, 1(1), pp. 47-54.
ITS, 2014. Pedoman Penyusunan Kurikulum 2014 -2019. Surabaya: Institut Teknologi Sepuluh Nopember.
Majid, A., 2012. Perencanaan Pembelajaran Mengembangkan Standar Kompetnsi Guru. Bandung: Rosda Karya.
Mulyono & Asih, T. N., 2013. Pembelajaran NHT Pada Metode Numerik dengan Bantuan Aplikasi Maple. Unnes Journal of Mathematics Education Research, 2(1), pp. 190-196.
Pendidikan Fisika, T. P. K., 2015. Buku Kurikulum Program Studi Pendidikan Fisika FKIP Universitas Ahmad Dahlan. Yogyakarta: program Studi Pendidikan Fisika FKIP UAD.
Suparno, S., 2008. Staff Universitas Indonesia. [Online]
Available at: http://staff.ui.ac.id/system/files/users/supriyanto.si/material/komputasiedisi3.pdf
[Diakses 9 Desember 2018].
T. A. P. F., 2016. Rumusan Profil Lulusan dan Capaian Pembelajaran Asosiasi Program Studi Pendidikan Fisika. Surakarta: Muhammadiya.
Wulandari, T. C., 2016. Pengembangan Modul Barisan dan Deret Berbasis Konstekstual. Jurnal Inspirasi Pendidikan Universitas Kanjuruhan Malang, pp. 883-889.
Yanse, N. M. N., 2012. EFektivitas Metode Adams Bashforth-Moulton Order Sembilan Dalam Menganalisis Model Penyebaran Penyakit Demam Berdarah Dengue (DBD), Jember: FKIP Universitas Jember.
Downloads
Published
Issue
Section
License
COPYRIGHT TRANSFER FORM
The copyright to this article is transferred to Universitas Ahmad Dahlan (UAD) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UAD. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
- This paper has not been published in the same form elsewhere.
- It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
- A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UAD. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, micro form, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
- Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
- Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UAD copyright notice are indicated, the copies are not used in any way that implies UAD endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
- Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
