Application Status of the Barkhausen Effect in Nondestructive Testing

Yuan Huijuan, Zhang Enjing, Li Hongmei, Fu Jian, Yang Ying Ying, Zou Ying, Hu Dandan

Abstract


Change of internal structure or internal defect in ferromagnetic materials can produce change in Barkhausen noise, and by using Barkhausen noise signal measurement, the quality and internal defects of the material can be judged. The nondestructive testing technology is based on the Barkhausen effect, it gets the attention because of its advantages, such as rapid, non-destructive, mensurable, mainly used to detect stress, hardness, grain size, grinding burn etc.. The research status of Barkhausen effect in nondestructive testing was reviewed. Its application situation was investigated that the nondestructive testing technology based on the Barkhausen effect on stress, hardness, grain size, grinding burn detection etc., and the relationship between the MBN signals and stress, hardness, grain size, grinding burn were showed. 


Keywords


Barkhausen noise; Barkhausen effect; stress; hardness; grinding burn

Full Text:

PDF


DOI: http://dx.doi.org/10.12928/telkomnika.v12i3.96

Article Metrics

Abstract view : 321 times
PDF - 298 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus, 9th Floor, LPPI Room
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120 ext. 4902, Fax: +62 274 564604

View TELKOMNIKA Stats