Simulation and Hardware Implementation of Shunt Active Power Filter Based on Synchronous Reference Frame Theory

Karthikrjan Senthilnathan, Iyswarya Annapoorani, S. Ravi

Abstract


This paper describes about the Shunt Active Power Filter (SAPF) for the elimination of the current harmonics in the line side. The Active Power Filter is based on the Voltage Source Inverter (VSI) topology. The Synchronous Reference Frame (SRF) theory based control strategy is utilized for SAPF. The SAPF has the better performance for compensation of harmonics. The simulation of shunt active power filter is performed in MATLAB/Simulink. The SAPF is implemented in hardware protptype with ATMEGA 8 Microcontroller. The Simulation and Hardware result shows that the current harmonics are eliminated in the system.


Keywords


shunt active power filter; voltage source converters; harmonics; synchronous reference frame

Full Text:

PDF


DOI: http://dx.doi.org/10.12928/telkomnika.v16i1.6524

Article Metrics

Abstract view : 1806 times
PDF - 252 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus, 9th Floor, LPPI Room
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120 ext. 4902, Fax: +62 274 564604

View TELKOMNIKA Stats