Performance Evaluation of DCF Length for High Scalability NG-PON2

Brian Pamukti, Doan Perdana

Abstract


Next Generation Passive Optical Network Stage 2 (NG-PON2) have to resolve the problem like demand each user, for example, HDTV, 3DTV, Hologram and Telemedicine. The research designed Passive Optical Network (PON), which is meet requirements of NG-PON2. Using stacked 4 Optical Line Terminal (OLT) with an aggregate 40 Gbps transmitted on fiber Single Mode Fiber (SMF) and Dispersion Compensation Fiber (DCF) by comparing the system without DCF cable. On the condition of minimum standards, the range of 40 km with a power splitter 1:64 only 9:01% power difference while the increased in the Q factor of 65.5%. With these results, it can be said that systems using DCF can be used optimally. In addition, with the power splitter 1: 4 and a lower power worth 0 dBm can produce a range of 150% further. With the same distance as far as 40 km, this research increasing power splitter 6 times increase compared with previous research.

Keywords


next generation passive optical network stage 2; time wavelength division multiplexing; optical fiber cable; dispersion compensation fiber;

Full Text:

PDF


DOI: http://dx.doi.org/10.12928/telkomnika.v15i1.3660

Article Metrics

Abstract view : 263 times
PDF - 349 times

Refbacks



Copyright (c) 2019 Universitas Ahmad Dahlan

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus, 9th Floor, LPPI Room
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120 ext. 4902, Fax: +62 274 564604

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

View TELKOMNIKA Stats