IoT-based weather station with air quality measurement using ESP32 for environmental aerial condition study

Prisma Megantoro, Shofa Aulia Aldhama, Gunawan Setia Prihandana, P. Vigneshwaran

Abstract


This article discusses the design of a weather station device that also functions to measure the concentration of gases in the air. This real-time telemetry device based on the internet of things (IoT) uses the ESP32 board to process measurement data. Some of the weather parameters measured are wind speed, wind direction, humidity, ambient air temperature, air pressure, rainfall, and ultraviolet (UV) index. Meanwhile, the gas concentration parameters in the air are ozone, hydrogen, methane, ammonia, carbon monoxide, and carbon dioxide. The readings from all sensors are processed by the ESP32 board and uploaded to the server. Then a client device will receive the data set and then processed, displayed on the monitor, and stored in the form of a text file. Furthermore, the monitor and the data are used for the analysis of the surrounding air quality and weather conditions.

Keywords


air pollution; air quality; internet of things; telemetry; weather condition; weather station;

Full Text:

PDF


DOI: http://dx.doi.org/10.12928/telkomnika.v19i4.18990

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120
Fax: +62 274 564604

View TELKOMNIKA Stats