Voltage Regulation of Boost Converter using Observer based Sliding Mode Controller

Ramadhani Kurniawan Subroto, Sapriesty Nainy Sari, Zainul Abidin, Kuo Lung Lian

Abstract


This study dealt with output voltage regulation of boost converter using observer based sliding mode controller comprises of adaptive PI sliding surface. Observer was designed to estimate the inductor current value, such that no sensor was required as a feedback. Adaptive PI sliding surface was constructed from the difference between estimated inductor current and its reference value. The stability of proposed method was ensured by using Lyapunov direct method. To test the system performance, numerical simulation was conducted. The result indicated that the integral absolute error value of proposed method was 0.19, which was 7 times less than sliding mode with PI sliding surface. Consequently, the proposed method was able to estimate accurately the inductor value, track the reference voltage perfectly, and show its robustness against parameter variations.

Keywords


boost converter; observer; sliding mode control; voltage regulation;

Full Text:

PDF


DOI: http://dx.doi.org/10.12928/telkomnika.v16i6.11558

Article Metrics

Abstract view : 24 times
PDF - 42 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Universitas Ahmad Dahlan

TELKOMNIKA Telecommunication, Computing, Electronics and Control
ISSN: 1693-6930, e-ISSN: 2302-9293
Universitas Ahmad Dahlan, 4th Campus, 9th Floor, LPPI Room
Jl. Ringroad Selatan, Kragilan, Tamanan, Banguntapan, Bantul, Yogyakarta, Indonesia 55191
Phone: +62 (274) 563515, 511830, 379418, 371120 ext. 4902, Fax: +62 274 564604

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

View TELKOMNIKA Stats