ANALYSIS OF TERMINAL TRUCK EFFECTIVENESS WITH OVERALL EQUIPMENT EFFECTIVENESS
Abstract
Keywords
Full Text:
PDFReferences
Ahuja, LPS, & Khamba, JS (2008). Total Productive Maintenance: Literature Review and Directions. International Journal of Quality & Reliability Management, 25(7), 709–756.
Arwanie, MN (2010). Analisis Faktor Six Big Losses pada Mesin Cane Cutter yang Mempengaruhi Efisiensi Produksi Pabrik Gula PTPN II Sei Semayang. Tugas Akhir Sarjana. Universitas Sumatera Utara.
Assauri, S. (2008). Production and Operations Management. Jakarta: LPFEUI.
Corder, A. (1996). Teknik Manajemen Pemeliharaan. Jakarta: Erlangga.
Hardinata, D. K., Rachmadita, R. N., & Maharani, A. (2018). Analisis Nilai Efektivitas pada Mesin Gas Cutting Koike Sanso Kogyo Type IK-2000 pada Perusahaan Manufaktur Alat Transportasi. Proceedings Conference on Design Manufacture Engineering and Its Application, 2(1), 149–154.
Hasrul, H., Shofa, M. J., & Winarno, H. (2017). Analisa Kinerja Mesin Roughing Stand dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) dan Failure Mode Effect Analysis (FMEA). Jurnal INTECH, 3(2), 55-60.
Herwindo, Rahman, A., & Yuniarti, R. (2014). Pengukuran Overall Equipment Effectiveness (OEE) Sebagai Upaya Meningkatkan Nilai Efektivitas Mesin Carding (Studi Kasus: PT. XYZ), Jurnal Rekayasa Dan Manajemen Sistem Industri, 2(5), 919-928.
Mwanza, B. G., & Mbohwa, C. (2015). Design of A Total Productive Maintenance Model for Effective Implementation: Case Study of A Chemical Manufacturing Company. Procedia Manufacturing, 4, 461–470.
Pharbu, MV (2014). Optimization of Overall Equipment Effectiveness in A Manufacturing System. International Journal of Inovative Research in Science, Engineering and Technology, 3(3), 1192–1196.
Rizkia, I., Adianto, H., & Yuniati, Y. (2015). Penerapan Metode Overall Equipment Effectiveness (OEE) dan Failure Mode and Effect Analysis (FMEA) dalam Mengukur Kinerja Mesin Produksi Winding NT-880N Untuk Meminimasi Six Big Losses. Reka Integra Jurnal Online Institut Teknologi Nasional, 03(04), 273–274.
Rozaq, MI (2015). Penerapan Overall Equipment Effectiveness (OEE) dalam Implementasi Total Productive Maintenance (TPM) Studi Kasus di PT. Adi Satria Abadi Kalasan. Tugas Akhir. Universitas Pembangunan Nasional “Veteran†Yogyakarta.
Samad, MA (2012). Analysis of Performance by Overall Equipment Effectiveness of the CNC Cutting Section of a Shipyard. ARPN Journal of Science and Technology, 2(11), 1091–1096.
Slack, N., Chambers, S., & Johnston, R. (2010). Operations Management. Harlow: Pearson Education.
Syukron, A., & Kholil, M. (2013). Six Sigma Quality For Business Improvement. Yogyakarta: Graha Ilmu.
Yuwana, A. S., & Siswanto, N. (2017). Simulasi Kegiatan Bongkar Muat Untuk Optimasi Combine Tractor Terminal (CTT) Pada Terminal Petikemas di Surabaya. Jurnal Neo-Bis, 1(1), 1–15.
DOI: http://dx.doi.org/10.12928/si.v19i1.19648
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Jurnal SPEKTRUM INDUSTRI Indexed by:
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional