OPTIMALISASI PENENTUAN RUTE DISTRIBUSI PUPUK UNTUK MEMINIMALKAN BIAYA TRANSPORTASI DENGAN METODE SAVING MATRIX

Akhmad Sutoni, Iman Apipudin

Abstract


Product delivery must be in accordance with customerdemand in a timely and efficient manner. So that thedistribution process does not result in waste of time,distance, and energy. CV. XY is engaged in trading theneeds of agricultural materials having problems in thedistribution process. The sender's route itself changes overtime depending on the driver's wishes. So there will be manydifferent routes with one goal each. The goal is to produce alonger shipping path, without first looking at vehiclecapacity and the distance that must be traveled. This resultsin expensive transportation costs. From data processingdistribution using the Matrix Saving method obtained 4 newroutes, namely Route 1 (DC - CUS 3 - CUS 10 - CUS 8 -CUS 6- DC), Route 2 (DC - CUS 4 - CUS 2 - CUS 7 - DC) ,Route 3 (DC - CUS 5 - CUS - 9 - CUS 11 - DC), Route 4(DC - CUS 1 - CUS 12 - DC). Distance saving and costefficiency were obtained from 8 routes to 4 routes and totaldistance saving of 39.1 km. Saving in transportation costs ofRp. 12,825,120 or 50% per month.

Keywords


Transportation; Distribution; Supply Chain; Saving Matrix

Full Text:

PDF

References


Arifudin, A., Wisnubroto, P., Parwati, I. (2017). Optimalisasi Vehicle Routing Problem dengan Pendekatan Metode Saving Matrix dan Clarke dan Wright Saving Heuristic. Jurnal Rekayasa dan Inovasi Teknik Industri (REKAVASI), 5(1), 1-9.

Azizah, N., Oesman, I. (2015). Optimalisasi Biaya Distribusi Produk PT. Madubaru dengan Pendekatan Metode Saving Matrix dan Generalized Assgnment. Jurnal Rekayasa dan Inovasi Teknik Industri (REKAVASI), 3(2), 102-107.

Baskoro, D., Hidayat, H., Gartika, G. (2018). Efisiensi Proses Distribusi Bahan Bakar Minyak di PT. Pertamina Persero Depot Pelumpang Jakarta. Jurnal Manajemen Bisnis Transportasi dan Logistik (JMBTL), 4(3), 381-392.

Bowersox, D.J. (1978). Logistical Management : A Systems Integration of Physical Distribution Management and Materials Management. New York : MacMillan.

Chopra,S., Meindle, P. (2007). Supply Chain Management Strategy : Planning, & Operation. New Jarsey : Pearson, Education International.

Clarke, G., Wright, J.W. (1964). Scheduling of Vehicles from Central Depo to a Number of Delivery Points. Operations Research, 12, 568-581

Demez, H. (2013). Combinatorial Optimization : Solution Methods of Travelling Salesman Problem. Thesis. Turkey : Eastern Mediterranean University.

Hidayat, P., Kristinawati, A. (2014). Usulan Penentuan Strategi Pendistribusian yang Optimal (Studi Kasus P.T. X). Jurnal Metris 15, 111-118.

Hudori, M., Madusari, S. (2017). Penentuan Angkutan Tandan Buah Segar (TBS) Kelapa Sawit yang Optimal dengan Metode Saving Matrix. Jurnal Citra Widya Edukasi, IX(1), 25-39.

Hutabarat, J. (2008). Penentuan Jalur distribusi pada Rantai Suply dengan Metode Saving Matriks. Prosiding Seminar Nasional Manajemen Teknologi VIII, Surabaya, A.1.1-A.1.7.

Ikfan, N., Masudin, I. (2013). Penentuan Rute Transportasi Terpendek untuk Meminimalkan Baya Menggunakan Metode Saving Matriks. Jurnal Ilmiah Teknik Industri, 12(1), 165- 178.

Indrawati, Eliyati, N., Lukowi, A. (2016). Penentuan Rute Optimal pada Pengangkutan Sampah di Kota Palembang dengan Nenggunakan Metode Saving Matrix. Jurnal Penelitian Sains,

(3), 105-110.

Pujawan I., Mahendrawathi. (2010). Supply Chain Management : Cetakan Kedua. Surabaya : Guna Widya.

Sari, M., Dhoruri, A., Eminugroho, R.S. (2016). Penyelesaian Capacitated Vehicle Routing Problem Menggunakan Saving Matriks, Sequential Insertion dan Nearest Neighbour di Victoria RO. Jurnal Matematika-S1, 5(3), 1-11.

Sutoni, A., Agustian, D. (2017). Penjadwalan Pengiriman Produk Kaos Oleh C.V. Chronicle Mart Kepada Sub Distributor Cianjur dengan Mengunakan Metoda DRP (Distribution Requirement Planning). Jurnal Manajemen Industri dan Logistik (JMIL), 1(2), 121-132.

Sutoni, A., Asilah, Nur. (2018). Penentuan Jarak Pendistribusian Gas LPG 3 Kg dengan Metode Algoritma Heuristik. Jurnal Media Teknik dan Sistem Industri (JMTSI), 2(2), 37-42

Yuniarti, R., Astuti, M. (2013). Penerapan Metode Saving Matrix dan Penentuan Rute Distribusi Pemium di SPBU Kota Malang. Jurnal Rekayasa Mesin 4(1) , 17-26.




DOI: http://dx.doi.org/10.12928/si.v17i2.13139

Article Metrics

Abstract view : 0 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Universitas Ahmad Dahlan

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal SPEKTRUM INDUSTRI Indexed by:

 

View Spektrum Industri Stats

Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional